I can Tx/Rx to one local repeater, but not another (I'm well within range/LOS). I can receive well, but cannot transmit. See below repeater info from myGMRS. I've tried all of the given input tones. I don't know if this info helps, but I was able to hear only one side of a conversation today. I am using a preprogrammed repeater channel on a Radioddity DB-25. I appreciate any thought into this.
LOCAL TALK TONE 103.5, 141.3 TRAVEL TONE ENCODE SIDE ONLY CARRIER ON RX.
REPEATER IS LINKED TO OUR DIAMOND PT, SHAWBUTE, GREENS PEAK ANDWRAP405 TOWERS MTN 600 24/7. USE DCS CODE 265N ON THE ENCODE SIDE OF YOUR RADIO ONLY FOR LINK ACCESS, CARRIER ON YOUR DECODE SIDE. THIS REPEATER IS CONNECTED TO THE SWCRS NETWORK VIA DIAMOND PT ON WEDNESDAYS 16:00 HRS-18:00 HRS, SUNDAYS FROM 15:30 HRS TO 18:00 HRS FOR REGIONAL AND NATIONAL NET USE. FOR MORE INFORMATION VISIT SWCRS.ORG.
You can post now and register later.
If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.
Question
WSAZ300
I can Tx/Rx to one local repeater, but not another (I'm well within range/LOS). I can receive well, but cannot transmit. See below repeater info from myGMRS. I've tried all of the given input tones. I don't know if this info helps, but I was able to hear only one side of a conversation today. I am using a preprogrammed repeater channel on a Radioddity DB-25. I appreciate any thought into this.
LOCAL TALK TONE 103.5, 141.3 TRAVEL TONE ENCODE SIDE ONLY CARRIER ON RX.
REPEATER IS LINKED TO OUR DIAMOND PT, SHAWBUTE, GREENS PEAK AND WRAP405 TOWERS MTN 600 24/7. USE DCS CODE 265N ON THE ENCODE SIDE OF YOUR RADIO ONLY FOR LINK ACCESS, CARRIER ON YOUR DECODE SIDE. THIS REPEATER IS CONNECTED TO THE SWCRS NETWORK VIA DIAMOND PT ON WEDNESDAYS 16:00 HRS-18:00 HRS, SUNDAYS FROM 15:30 HRS TO 18:00 HRS FOR REGIONAL AND NATIONAL NET USE. FOR MORE INFORMATION VISIT SWCRS.ORG.
2 answers to this question
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.