dosw Posted July 22 Report Share Posted July 22 I wasn't quite sure which category to post this in. I obtained a pair of RTL-SDR BLOG v4 software defined radio dongles. And I've spent some time playing with one of them today. It's actually pretty fun tinkering with them. And I've already learned a lot about how to configure SDR++ (aka sdrpp). One thing I haven't figured out yet: It is possible to set up dual virtual radios that can be tuned to different frequencies within the same sampling range (2.4-3.2mhz) but I think it's possible to set up two of the SDR radios at once so that multiple VFO selections can be made within separate sampling ranges. So that's the question: How do you get SDR++ to provide access to two software defined radios at the same time. Also, has anyone used one of these as a scanner? What software do you prefer for scanning? A reason for having dual SDR dongles is to be able to set up trunk tracking, but as I'm only a day in with these I'm still learning where to start. Quote Link to comment Share on other sites More sharing options...
gortex2 Posted July 22 Report Share Posted July 22 I use SDR Trunk for monitoring multiple trunking systems. I have 6 dongles in my PC for that system. Use 2 dongles for work at a tower site with SA and SDRTrunk. Google is yoiur friend there is a ton of info out there on this. Quote Link to comment Share on other sites More sharing options...
WSCU465 Posted July 22 Report Share Posted July 22 On AirSpy SDR#, you're able to add a "spectrum slice" to monitor another frequency by clicking on the " +" icon. At least this is what I found out, I'm new to it as well. It's cool stuff. RayDiddio 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.