Jump to content
  • 0

I accidentally changed my RPT-16 to the same frequency as RPT-15 and can't change it back.


WSEZ761

Question

I'm a noob. Heard of GMRS only 1 week ago. The only repeater in my area uses RPT-16, CH 24, RF 462.5750.

I have Wouxun KG-935G Plus. Somehow I managed to Change RPT-16 to FR 462.550 and can't chang it back.

Returning to factory settings has not fixed the problem.

Now RPT-15 and 16 have the same frequency. I have no idea how I did it, nor how to fix it. Any ideas?

 

Link to comment
Share on other sites

4 answers to this question

Recommended Posts

  • 0
1 minute ago, WSEZ761 said:

I'm a noob. Heard of GMRS only 1 week ago. The only repeater in my area uses RPT-16, CH 24, RF 462.5750.

I have Wouxun KG-935G Plus. Somehow I managed to Change RPT-16 to FR 462.550 and can't chang it back.

Returning to factory settings has not fixed the problem.

Now RPT-15 and 16 have the same frequency. I have no idea how I did it, nor how to fix it. Any ideas?

 

Get a programming cable and use rt systems and then you can do what ever you want.  

Link to comment
Share on other sites

  • 0
14 hours ago, WSEZ761 said:

I'm a noob. Heard of GMRS only 1 week ago. The only repeater in my area uses RPT-16, CH 24, RF 462.5750.

I have Wouxun KG-935G Plus. Somehow I managed to Change RPT-16 to FR 462.550 and can't chang it back.

Returning to factory settings has not fixed the problem.

Now RPT-15 and 16 have the same frequency. I have no idea how I did it, nor how to fix it. Any ideas?

 

I have a 935G+ and changed RPT-16 from 462.5750 to 462.550 and saved the change. I then turned the radio of and back on and then checked to make sure the change was still there. Then I used the channel wizard to change RPT-16 back to 462.5750 and saved the change. Everything is normal again. I'm not sure what you did but I tried to reproduce your issue and couldn't. The Channel Wizard worked for me.

Link to comment
Share on other sites

  • 0
9 hours ago, WRHS218 said:

I have a 935G+ and changed RPT-16 from 462.5750 to 462.550 and saved the change. I then turned the radio of and back on and then checked to make sure the change was still there. Then I used the channel wizard to change RPT-16 back to 462.5750 and saved the change. Everything is normal again. I'm not sure what you did but I tried to reproduce your issue and couldn't. The Channel Wizard worked for me.

Thank you. I didn't realize I had to save my change. I don't remember making the change or using the save feature so I must have done it by accident. Anyhow, that was the step I was missing.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Answer this question...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Guidelines.