Faile to upload via Chirp with TD H3

[WRZI299]

I was unable to upload any changes to my TD H3 even though Chirp said it had. Same frequencies from original settings. It reads the radio fine. I am using the microphone connection.

Any help would be greatly appreciated.

I also tried via bluetooth and odmaster but it wouldn't read the radio.

weird,

Thanks, hal

[TrikeRadio]

I use the USBc cable into the programing connection under the mic cable connection.

You are using a programming cable into the two prong microphone holes?

Edited 8 hours ago by TrikeRadio
added more comments

[RayDiddio]

Are you running the latest version? There was an update pushed a couple days ago. 
 

Another thing to try is to download from the radio first and then upload your changes from your saved file after. 
 

[RayDiddio]

3 hours ago, TrikeRadio said:

I use the USBc cable into the programing connection under the mic cable connection.

You are using a programming cable into the two prong microphone holes?

The USB cable is very convenient, eh? Wish my D878UV II Plus had the option.

I bought the programming cable for my TD-H3s but never use it. No need. 

[Reloader762]

Just an FYI, I have several H3s and one H8 that I have reprogrammed several times using CHIRP on my Linux desktop, I've also used odmaster as well but find CHIRP much easier for programming.  I also found that I can program any HT I have, of which I have different variations of Baofengs, Wouxun, Tidradios, etc. using just the Wouxun PCO-009 WXUSB “Red” Programming Cable that came with my KV-UV9GX radio.  Current firmware version I'm using is 240702.