Guest ATradio Posted November 6 Report Posted November 6 After entering test mode I only have channels 39-42. None give the Option to change mode as was available with Channel 43 either. Any info on this? Quote
SteveShannon Posted November 7 Report Posted November 7 30 minutes ago, Guest ATradio said: After entering test mode I only have channels 39-42. None give the Option to change mode as was available with Channel 43 either. Any info on this? That sounds correct. Only channel 43 allows you to change modes. Channels 39-42 each display something else. Here’s what I found: “Test mode enabled by pwr down, hold func+F4 and power up/Enables CH39 to 43 to be selected. ON 43 hold ptt in and can then rotate selection knob to change the mode ie broadband TX all vhf and uhf frequencies. Release ptt to save. Power down and back on, radio comes on in new mode. also CH-39-42 is selectable shows 39= RF FW version 1.10, 40 = CPU V1.11, 41 lcd V1.10, 42 = mode:02 amateur, 01 fixed, 03 broadband unlimited TX.” Quote
Guest ATradio Posted November 7 Report Posted November 7 I found that paragraph. But what I find on ch42 is the same as ch41. LCD v1.1. Quote
Recommended Posts
Join the conversation
You are posting as a guest. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.