Jump to content

Open Club  ·  8 members  ·  Free

Montana GMRS

Recommended Posts

Posted

I just installed a dual band Alinco DR-735T, in the Ford Police Interceptor.  I used a Bulletpoint mounting system, which greatly speed up the install.  On the roof, I installed a small 3" stubby antenna.  I was able to hit our local repeater with a strong signal, about 35 miles away.  Quite a lengthy install.  Took the headliner down and dismantled the center console to run wires.  Not my first install, by any means, but still quite a process to get it to the factory look.

vce_si_j.jpg

4D8sePuY.jpg

8Vc5OWFF.jpg

GpN9RnxY.jpg

difR7eFg.jpg

Posted

This was my first headliner.  I found a guy on youtube who "de-policify's" (his term) interceptors.  I've spoken with him on the phone and that really boosted my confidence.  I used to install radios, C.B.'s, etc, back in the 70's and 80's, and it was a totally different animal back then.  Now, the headliner is one piece and solid, instead of a glued on fabric.  Just had to remove the pillar coverings, which are snapped in, and the whole thing just fell down!  Easy peasy.

Posted
36 minutes ago, WSGJ850 said:

This was my first headliner.  I found a guy on youtube who "de-policify's" (his term) interceptors.  I've spoken with him on the phone and that really boosted my confidence.  I used to install radios, C.B.'s, etc, back in the 70's and 80's, and it was a totally different animal back then.  Now, the headliner is one piece and solid, instead of a glued on fabric.  Just had to remove the pillar coverings, which are snapped in, and the whole thing just fell down!  Easy peasy.

Thanks, that gives me a little confidence.

Posted
5 minutes ago, WSGJ850 said:

Ya know, we're not that far apart.  If you're planning on doing this in the spring or summer, I wouldn't mind taking a ride over and giving you a hand.

Well, 120 miles each way or so is a little far, but I truly appreciate your offer. I might even take you up on it! Thanks!

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Guidelines.