Jump to content
  • 0

Accessing a repeater with my Wouxon KG-935+


Question

Posted

So, I'm trying to program my radio to access a local repeater.  The frequency of the repeater happens to be 462.600000 with a TX-CTCSS at 141.3.

On my radio, which repeater channel do I use?  I'm thinking RPT-17 (which also shows a smaller CH-25 in the upper right hand side of the screen).  Is this correct?  Is there a way to see the TX Frequencies for the RPT channels on the Wouxon KG-935+?

Any assistance would be appreciated.

1 answer to this question

Recommended Posts

  • -1
Posted

You’re gonna need to learn what frequencies relate to what “channels”.   The radio should have come with a chart.  When you purchased your license from the fcc you did say you read and understood the gmrs rules.  If you did read the rules you said you did, you would know what channels relate to what’s frequencies.  You can also do an internet search of gmrs frequencies      I’d also highly recommend you program on a computer it’s waaay easier.  

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Answer this question...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Guidelines.