WRPL700
-
Posts
80 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Classifieds
Posts posted by WRPL700
-
-
2 hours ago, Lscott said:
I have no idea. It's a free download and simple to install. You can get it and check.
Will do.... Thank you!!!
-
38 minutes ago, WRUU653 said:
Here is what I ended up with on my UV-9G. It is close to what is shown in the link Lscott posted but a bit different. I found this to work good for me but you may find your radio and area a little different. You'll notice I set my GT-3WP (same radio but HAM) a little different as they seemed to behave a little differently. I first came to do this because I noticed The UV-9G would always show reception even when no one was keying up from a local repeater that is close by and that wasn't happening on my GT-3WP even though they were exactly the same settings out of the box. I also noticed if I was monitoring that repeater on B and something else on A, that B always saw the repeater as active I wasn't ever hearing anything on A. Having two radios really helps when diagnosing issues. I just played around with settings to quite out the noise in my area while scanning and to give myself some room to play with. The first one is UV-9G, Second is GT-3WP...
You rock, thank you! I was just using the CPS to configure my HT, but now I will have to install CHIRP.
-
On 1/6/2023 at 11:56 PM, Lscott said:
It looks like this was done in 2016. Has CHIRP been updated to include other models?
-
WRUU653:
Care to share your settings for the UV-9G? I have a GMRS-9R which is basically the same. The squelch is horrible.
Thank you!!!
My only problems with BaoFeng
in General Discussion
Posted
I have not done it yet. It will either tomorrow or next week. I did download and install Chirp, but no time today. I will post back my settings after I get it done.