Adamdaj

Amateur Radio Clubs cover this nation like a blanket in some populated areas. However, I don't see too many GMRS Clubs, not saying they aren't any. But I don't see too many around the Delaware Vally area, at least not well known as the Amateur Radio Clubs. I won't say they aren't any, because I don't know that for a fact. I know that there are a quite of a number of GMRS Repeaters stretching from Ohio Pennsylvania line to the Jersey Shore. A good number of those repeaters have excellent coverage but using them may not be easy for some of them aren't listed on MyGMRS or Repeaterbook. So, you may be driving without notice that it is a closed or semi privet system.

Yep, those days are long gone. Those old 11m Walkie talkies had a larger footprint then the 49mhz radios that Fisher Price or Ty Co Electronics put out. Beside the squelch circuit in most of those transceivers didn't work. You always heard the static when no one was talking. I had several of those CB handhelds of the years and always picked RF noise from Over Head Catenary near the PRR Northeast Corridor at Holmesburg Junction. Yep, my friend Jimmy and I would hang out at Holmesburg Junction and stay in tough with the CB. Jimmy would go to one end of Holmes Interlocking and I would hang out at the Tower.

Just as Amateur Radlo Licensees, I started on the 11m band aka CB radio. I took my exam on 06 February 2003 and granted KB3JCP 11 February 2003. June 2004 is when applied for GMRS license and there's times that I don't really use it, but I do make use of both at the City to Shore MS 150 for nearly 20 years. Once I upgraded back in 2014 I applied for a vanity license K3JCP. I really can't get my father to use a cell phone and never really tried to get him to use GMRS. I wish I could get pick the radio, because I have access to 2 repeaters that if need him or he needed me, we could have connection.

That's acceptable by Zello Right? Right now, I don't have my mobile rig set up to my Diamond X50, which will cover 440 to 470 with no hassle. I'm not too sure about VHF out of the 2m portion, but I suspect it will handle MURS Channels 151. to 155. Plus, I'm really not too sure what is the closes GMRS repeater near me that is linked up to the network. For mobile I have the CS 800 and CS 800D, which I know neither one of them are Part 95 E accepted. They're primarily DMR Amateur Radio, but with a Part 90 Typed Acceptances.

Yep, I guess the FCC didn't really have to list every relation category. I just didn't want to assume the FCC excluded Cousins, unless it's the four-legged relatives. LOL Thanks! 73 to All

I am so glad that I own two GMRS PROs, because this Radio is simpler than programming any other transceiver, GMRS or Amateur Radio. I would like to see more manufacturers, such ICOM or KENWOOD come out with a line of radios for Analogue and Digital, such NXD or DMR. Unfortunately, just as there's too much competition with other manufacturers that producing GMRS radios for less. However, you can't beat the ability to program on the fly using an Android device. The majority of radios, GMRS or Amateur Radio. You either have to program it by desktop pc or laptop pc or manually program it from the front panel.

I don't want to assume either way, but from what I understood, cousins are not immediate family. However, the FCC seems to consider everyone other than cousins to immediate family. I know what I have read, so did I miss something here? The Licensees Family Structure as I understand. Spouse Children or Stepchildren Siblings Parents & Grandparents Aunts & Uncles In Laws I did not see provisions to allow cousins to be under umbrella. Unless the FCC defines Cousins as Siblings. I am in now complaining, just wanted to see it I should go back and study the entire FCC Part 95 Rules and Regulations.

Thank You !

I assume that some members who have posted comments on this topic, probably asking what I posted. It seems that I strayed off topic and not really making sense. Forgive me for straying off topic, because I thought that I had something to contribute. Obviously, I didn't.

I don't really know about changing or applying for vanity licenses for GMRS. Amateur Radio, Yes!

You right, no one should care whether a person uses Ten Codes or Q Codes on Amateur Radio or GMRS to aid in relaying information. After all, everyone should be entitled to say what they want, as long as it's profanity.

DMR on the General Mobile Radio Service Band sounds good, but not all GMRS users are really familiar with DMR. I mean not all GMRS license holders are also Amateur Radio License holders. I do forget the one manufacture of an FRS radios that have digital capability, but what format ? I want to say Retevis, but I could be wrong. Anyway, I know it isn't any of the other manufactures, such Midland or Motorola. Of course, I would sell all the vertex radios I own to buy Motorola GMRS Mobile if they came out with one, but I have better chance of seeing the Dodgers move back to Brooklyn before Motorola produce a GMRS mobile radio. I kind of dabbled with on FRS low power of course, just to hear my voice over my Scanner. I used channel 01 and 07 just brief test which is technically violating FCC regulations somewhere, but I would not use it unless the R&R changes to allow.

According to my knowledge for most bubble FRS / GMR radios, there isn't a so-called standard default CTCSS or DTCSS. I do know that Midland has one or two models with preselected channels with preselected PL/DPL tones. So, I really can't really say that there isn't a standard default tone. Of course, each manufacture may number their tone differently, but they do match up.

It never dawned on me the coast guard personnel. would be using FRS / GMRS. I know a few years ago. UNIDEN had a handheld that was FRS/GMRS and MARINE VHF. Of course, I guess they discontinued for reasons unknown to me. I assume those radios were being used on land rather than on water, especially on the VHF MARINE band. If the FCC would approve VHF MARINE with 5 extra channels, would be MURS. I'm sure it would be a good tool, especially when you sailing close to the shore or in the bay, VHF MURS would be good to have for family members that stay a shore. Of course, MURS is limited to 2 watts ERP. But those 2 watts from VHF transceiver can do better than UHF near water

I watched a video on YouTube on the KG-1000M. Nice looking radio and I'm sure with the right antenna and feedline, the 2 watts will cover great distances. At first, I didn't understand why the put split tones when all channels are simplex. I figured it out now, you program in a couple receive only channels and leave the transmit tone off.

My Explanation for my Post on 11 April 2023. I was referring to Radio Shack Pro 96 and 106 scanners had preprogrammed frequencies, which a handful of them were not in the services that listed as. Of course, they have CB radio, FRS / GMRS and MURS, they also have Part 90 VHF/UHF channels that piggybacked off of the Part 95 Services. That's what had me confused. I those Frequencies that I listed were Part 90 Business Band

You're absolutely right, the ten codes vary from state to state and county to county. I remember when I was an active member of the Town Watch, the Ten Codes were not necessary used in Philadelphia Polce, because Philly PD & FD just use plain langue with abbreviations from certain things. Tacony Watch 10-4 Affirmative 10-20 Location or What is your Location? 10-36 Time Check 10-100 Break 10-Double 100 Off Radio End of Tour / Shift However, I always use 10-7 The other codes we use were same as PPD and PFD........ FLAST = INFORMATION ON SUSPECT OR LOST INDIVIDUAL LOCAL = FIRE NAT = NO ACTION TAKEN RTF = REPORT TO FOLLOW 5292 = NOTIFY THE CORRENOR'S OFFICE FOR POSSIBLE DECEASED INDIVIDUAL Well that's all I remember using when I was actually working, may have been volunteering, but work is work.

There I go again, putting my two cents without understanding the full concept of this topic. Beside with the new generation, the young folks ages 8 to 30 wouldn't understand radio lingo that public safety and truckers use to use back in the day. Of course, not just Ten Codes, but the other lingo, such Smokey or Bear Trap. Heck, I may have seen trucker movies too many times and I still get a kick out of those phases they used on the air. Of course. that was common on CB and once in a while 10 meters, even though most Amateur Radio Operators would cringe using that over the Amateur Radio Bands. But I'm sure as long as it complies with the Rules and Regulations, it shouldn't a problem. Meaning, Don't say Knocking over the coin jar or running up Rocky's Steps, because that could really be hidden and be classified as a possible Felony, which FCC doesn't take too kindly to.

I don't have an opinion on the WOUXUN 935G, but I do however have an opinion on the BTECH GMRS PRO. I own two GMRS PROs and even though they may not be MOTOROLA radios, I can't complain about them. Good Audio Bluetooth Programming by phone or tablet All around a great tool to have I am waiting for BETECH to unveil an Amateur Radio Handheld version for 2m / 70cm with DMR or NXDN IDAS. If it does have NXDN IDAS capabilities, I would have good radio to go railfanning with, since some Class 1 Railroads are using NXDN IDAS in certain areas.

In recent years, Most Public Safey Agencies have abandoned the use Ten Codes, for not all Ten Codes have the same meanings. There for, there were a lot of critical information mishandled, because not all agencies use the same protocols when it comes to passing information via radio from point A to point B. Last year while I was working as NET CONTROL/ DISPATCH at the 2023 City to Shore Bike Ride for the MS Society, So I did use 10-4 to be briefly to let whoever I was on the radio that I understood and agreed. Of course, there was one Amateur Radio Operator that gave me some slack for saying 10-4, but I used it as an aide to help me with my duties as Dispatch / NCS. I know that Amateur Radio Operators don't want to hear Ten Codes, especially 10-4, because to them that's CB slang. I get what they're saying, but to put in CB slang, 10-4 Good Buddy That's what I would not say, especially working communications for any event large or small. My suggestion, if you are going to use Ten Codes or Q signals over the radio, use them in a professional manner. You don't want to sound as if you have watched too many movies and TV shows, that's not professional. Everyone that you have to communicate with via radio, must be on the same page, but this day and age, plain language is the best option. Don't double talk ok 10-4 or I'm 10-6 I'm Busy. I am guilty of double talking when I use the radio sometimes, but most of the time, I just use plain language. I can just hear some members of this forum. say no dah. Adam, tell us something new, don't tell us what is obvious, but it sounds like Sleep Typing. You heard of Sleep Walking, well Sleep Typing or Talking in my Sleep. I can't disagree and I won't be hurt for being chewed out with criticism. 73 to All Adam WQAI 363

It seems that I post something or add my two cents, I always windup looking like an illiterate individual, which I'm not. I have to admit I confuse myself at times. because I do my best to be knowledgeable about the Rules and Regulations when it comes to personal or business communications. Right now, I'm surprised that have madid this far as a General Class Licensee and a VE. I should sound be more confident and be knowledgeable about the FCC Rules and Regulations from 90 95 and especially 97.

Oh Ok ! I apologize I made a slight error or completely way out there as if I don't know anything about radios or anything else. Sorry !

I just went back and did a search under FCC part 95 R&Rs section B the bandwidth requirement for FRS/ GMRS channels. I'm not ashamed to admit that I was wrong about the bandwidth. However, I was correct about transmitting power, channels 08 through 14 are limited to 1/2-watt = 0.5mw ERP. That's something you can say that I'm wrong about that. As far as the repeaters channel spacing requirements, someone goofed up 95 Section E. Either the FCC or the Radio manufacturers has made an error the majority the radios already out there. According to the FCC the repeater channel spacing is listed at 20.0k where manufacturers, such as BTECH MIDLAND or MOTOROLA has their radios set for 25.0k. Don't tell that I don't know what I am talking about, because I do, do my homework when it comes to radios or other things that I'm interested in.

Ok What Ever you said, I wasn't entirely missed informed. Hey, I read the FCC Part 95 rules and regulations, so maybe you see something that have I overlooked. However, I know for sure that I am correct in regard to channels 08 through 14 are narrow band and limited to 1/2-watt ERP. Don't tell me that I'm wrong, because I know what I have read, so you can't say that I entirely wrong, just I won't say you're entirely correct.

Welcome to wonderful world of Radio Communication! Obviously, you obtained your GMRS license for reason other than emergencies. Don't be afraid to ask questions, because that how you gain knowledge.