@Sshannon has a good point, I thought you were asking about only tones...
You are trying to program a GMRS repeater... So, you need to put + (plus) for Duplex and 5.000000 (5 Mhz) for the Offset.
I have one question and one suggestion. First, the suggestion: Personally,I would not do TSQL for 31. I would just do Tone, and leave out the receive tone.
Same suggestion for repeater 32. I would leave the receive tone empty.
By leaving the receive tone empty you will hear everything transmitted on the 462 frequency you have programmed. That’s helpful for troubleshooting when just starting.
Now the question. How is the necessary transmit frequency entered?
In the screenshot you included, nothing is entered for an offset. I don’t have a BTech, so maybe it shows up somewhere else, but for each of your repeaters you will need to be transmitting with an offset of 5 MHz, so for repeater 31 you transmit on 467.65000 and for 32 you transmit on 467.70000. Somehow that must be done, whether that’s done by programming a separate transmit frequency or by entering an offset of 5 MHz or by telling the BTech that these are repeater channels.
