RoyalJayhawk

450-550 for 10 watts or 600-700 for 50 watts.

I can't tell you how many MOSFETs I have blown. My wife will tell you I mess more stuff up then I fix at times.. I think I'm more at 60%fix and 40%broke.

Just basic Truck setup nothing special. Midland MXTA25 Antenna, outer shell cracked due to overlanding. with a Wouxun KG-XS20G Mobile radio. Keeping the Antenna Coax in place, just upgraded radio (KG-1000G) and Antenna (Tram 1173 NMO UHF Antenna) My Home Base station is a ICOM F6011 radio with a 50Foot Tower/Mast with 2x Comet GP-3 Antennas. About to add 2 more to it. Also have a BTech GMRS 50V2 to play with. And a few 20/25 Watt radios. My mobile overland repeater rig is 2xRadioddity DB25-G. Running a custom firmware my buddy and I compiled based on the radioddity firmware. Using a Raspberrypi as the interface controller. I'm a ex automotive Electrical engineer. So I like to play around with stuff trying to mod it or break it.

Hey y'all, WRVI612 aka RoyalJayhawk here. I have stalked the forums for a while and finally signed up. I just ordered a wouxun kg-1000g and New Antenna is there any tip y'all might have? I have all my local repeaters and some Other state repeaters when I go on trips. I'm going to retire my KG-XS20G to a home base station, I have a 50 foot mas and an decent antenna. Plus I have some Boafeng handhelds UV-9G, UV-9R Pro and GM-15 Pro Radios Next is to get 2x KG-1000G for a repeater network in my area. North/West Kansas City area.