wrci350
-
Posts
344 -
Joined
-
Last visited
-
Days Won
6
Content Type
Profiles
Forums
Events
Gallery
Classifieds
Posts posted by wrci350
-
-
OK I just realized that I missed something important when I looked at that section: "and"!
(1) It retransmits only communications from GMRS stations operating under authority of the individual license under which it operates; and,(2) The GMRS stations whose communications are retransmitted are properly identified in accordance with this section.
Notice that it also says "under which it operates", so it's talking about the repeater, not about the stations using the repeater. So if you stand up a repeater that is only going to be used by your family, under your GMRS license, and all the users identify as required, the repeater does not have to ID.
Otherwise, the repeater is required to ID every 15 minutes as described in that same section, although it is implied that this is only while the repeater is in use.
-
Each GMRS station must be identified by transmission of its FCC-assigned call sign at the end of transmissions and at periodic intervals during transmissions except as provided in paragraph (c) of this section. A unit number may be included after the call sign in the identification.
...
(c) Any GMRS repeater station is not required to transmit station identification if:
(1) It retransmits only communications from GMRS stations operating under authority of the individual license under which it operates; and,
(2) The GMRS stations whose communications are retransmitted are properly identified in accordance with this section.
"GMRS station" includes repeaters. But read subpart (c)(2). That seems to state that, as long as every user is operating under the license associated with that repeater, or every user on a repeater is ID'ing correctly, then the repeater itself does not have to ID.
-
Amazon is *not* the place to buy antennas.
That looks very much like a knock-off of the Diamond X50A, which is a pretty good 2m/70cm ham antenna, and does fine on GMRS, at least for me. If that's the way you want to go, get a real one for $6 more:
- wayoverthere and WROA675
-
1
-
1
-
What cable were you looking at that was $50?
The Wouxon one is $15.99:
https://www.buytwowayradios.com/wouxun-pco-001.html
My experience is that this cable is MUCH better than the typical Baofeng one, and I use it for all my radios that require that type of cable now. No driver games, and I have one radio that would transmit when you plugged in a cheap cable; no such issues with the Wouxun one.
Interestingly enough, on the KG-935G page it says that cable is $14.99.
But I think I know where the $50 came from. You were looking at the RT Systems cable and software, which IS $49.
RT Systems software requires that you use the corresponding RT Systems cable. The item on the BTWR site is a bundle with both cable and software. But the cable can be used with multiple different radios that use the Kenwood interface, so you buy the cable once and then just buy the software if you want to program other radios that use the same cable.
Their software packages are great. Often easier to use than the manufacturer's software (if there IS any) and Just Works. When you get right down to it, analog radio programming software looks like a spreadsheet with another page where you can set options on the radio. So there is nothing fancy about their software; it just works and isn't full of bugs.
But if the Wouxun software meets your needs, then no reason to buy the RT Systems bundle. I would still recommend paying the couple extra bucks to get their programming cable.
-
32 minutes ago, tweiss3 said:
I suggest you go to RadioReference and take some time reading through the database for your area and the scanning forums.
You might be able to listen to all you want with your computer, then again, maybe not.
+1 on RadioReference. If you register for an account, you can post in your (or your youngster's) state forum and folks who are local can assist.
Or feel free to give us a state and county and we can give you a more informed recommendation. RR is definitely The Place for scanner folks though.
-
1 hour ago, lnelson007 said:
I’m hoping I can now just connect the second one and upload to that device the same data.
It should be just that easy. Plug the cable into the second radio and send the data to it.
-
49 minutes ago, MacJack said:
They have a very secure licensing authentication with authorization IDs, serial numbers, email address and they provide an authentication code. So after you download do not plan on installing unless it is within 9-5 5 days a week. Saying this as not to frustrate anyone since it needs to be validated with a authentication code.
That process is all automated. I purchased, downloaded, installed, activated, and used one of their packages at 10:30 on a Sunday night this past summer.
In this case I already had the cable needed for that package, or I would have had to wait for it to be delivered to me.
RT-Systems software is great, because it Just Works.
-
Not a member, and this is not an endorsement, but you might want to check this out:
Not sure what you mean by a "GMRS group", but I thought you might find it interesting.
-
1 hour ago, tweiss3 said:
This is a good option, will work in GMRS/MURS frequencies without a modification, but it is a DMR radio, and I can't find anything on the water resistant rating.
The DJ-MD5 is a DMR radio, but it works just fine as an analog radio too. However, I see "IP54" on several websites where you can buy one, yet the owner's manual states: "We don't guarantee any IP grade of this product." So perhaps that's a disqualifier. My apologies.
Another option would be the Alinco DJ-500TB, which has the same form factor as the MD5 (same batteries, etc.) but is analog-only. It also really IS IP54; even says so in the manual. I didn't recommend it originally since it's harder to find. I got mine from HRO and it was a special-order item. They still have it on their website so my guess is that it is still available.
https://www.hamradio.com/detail.cfm?pid=H0-016057
This is a Part 90 radio, which is what you would need. There is also another version of the DJ-500T that is amateur bands only, which would not meet your requirements.
-
I know you said you didn't need digital, but I believe the Alinco DJ-MD5XT checks all your boxes and is half the price of the Yaesu.
I have the older version and it's a nice radio.
-
I do not have personal experience with any of those antennas, but I can offer a few general comments.
1) Tram is regarded by many as being bottom of the barrel for antennas. Comet and Diamond, while being "amateur-grade" are definitely a step up.
2) Note that #3 is not only single band but also narrow bandwidth and will need to be adjusted (trimmed) for GMRS.
3) I'm not sure if a yagi is the right solution for you. Yagis are directional antennas. If there is *one* repeater you want to hit, then that would work. Otherwise you'll need a rotator so you can point it in the direction of whatever you are trying to talk to. Additionally, the one you have listed is narrow bandwidth, tuned for only part of the 2m and 70cm ham bands. If it won't work well on 440-450 it's going to be even worse on GMRS.
-
Certainly not the only option, but a good one:
https://www.theantennafarm.com/catalog/index.php?main_page=index&cPath=342_343_347_993_1410
Thesa are made wtih LMR-400UF (Ultra Flexible) so easy to work with and come with N connectors.
-
16 hours ago, maddogrecurve said:
I am leery about using the stock one or the 701-C anymore because the SWR is over 3 on both of those across all of the GMRS and FRS frequencies.
Don't believe SWR readings on HT antennas. The radio and the person holding it form the ground plane of the antenna system. Disconnecting the antenna and hooking it to an SWR meter will not give you an accurate reading.
Good antenna mount for residential installation
in General Discussion
Posted
What kind of coax are you using, and how long is it?