3cRadio Posted 9 hours ago Report Posted 9 hours ago greetings all! new to gmrs radio and had a repeater question. anyone now how its possible for my base station (20w) radio to make contact (receive & transmit) to a repeater that's over 75 miles away? i'm using a amazon special gmrs fiberglass antenna that's only mounted 10 ft off the ground. i have a local repeater approx. 6 miles away that uses .575 frequency with a tone of 162.2 in and out. i can't connect with it due to a mountain in between it and my location. as stated, the other evening i was able to communicate with the repeater that's further away which does have a .575 frequency with a tone of 162.2 in but 198.8 out. i'm not sure how this is possible; am i some how connecting to the repeater local to me and it relaying he signal to the further repeater even though it has a different output tone? Quote
SteveShannon Posted 8 hours ago Report Posted 8 hours ago 6 minutes ago, 3cRadio said: greetings all! new to gmrs radio and had a repeater question. anyone now how its possible for my base station (20w) radio to make contact (receive & transmit) to a repeater that's over 75 miles away? i'm using a amazon special gmrs fiberglass antenna that's only mounted 10 ft off the ground. i have a local repeater approx. 6 miles away that uses .575 frequency with a tone of 162.2 in and out. i can't connect with it due to a mountain in between it and my location. as stated, the other evening i was able to communicate with the repeater that's further away which does have a .575 frequency with a tone of 162.2 in but 198.8 out. i'm not sure how this is possible; am i some how connecting to the repeater local to me and it relaying he signal to the further repeater even though it has a different output tone? It’s possible that it is tropospheric ducting. It’s also possible that the farther repeater’s signal is getting to you because they have a very high antenna or because it is reflecting off something or refracting over a sharp edge. And it’s also possible that the distant repeater is linked with a nearby repeater. If your radio doesn’t have a receive tone set, it won’t matter what the repeater output tone is; your radio will allow the audio to be reproduced. 3cRadio and WRUU653 1 1 Quote
OffRoaderX Posted 8 hours ago Report Posted 8 hours ago Is there a mountain between you and the further away repeater like with the closer one? I regularly and normally connect to a repeater 69 miles away on my handheld radios and using my base-station with a big antenna on the roof, i can connect to repeaters 80 or 90 miles away - yet there are other repeaters 10 miles away that I cant connect to because of hills/mountains. 3cRadio, WRUU653 and SteveShannon 2 1 Quote
dosw Posted 8 hours ago Report Posted 8 hours ago 29 minutes ago, 3cRadio said: greetings all! new to gmrs radio and had a repeater question. anyone now how its possible for my base station (20w) radio to make contact (receive & transmit) to a repeater that's over 75 miles away? i'm using a amazon special gmrs fiberglass antenna that's only mounted 10 ft off the ground. i have a local repeater approx. 6 miles away that uses .575 frequency with a tone of 162.2 in and out. i can't connect with it due to a mountain in between it and my location. as stated, the other evening i was able to communicate with the repeater that's further away which does have a .575 frequency with a tone of 162.2 in but 198.8 out. i'm not sure how this is possible; am i some how connecting to the repeater local to me and it relaying he signal to the further repeater even though it has a different output tone? You think that's amazing, consider that with a handheld Yagi antenna an amateur can talk through the International Space Station's 2m/70cm (VHF/UHF) crossband repeater using a 5w handheld radio. Five watts, to reach a repeater hundreds, even a thousand miles away. But what's different about the ISS? It's not that the repeater is a ham repeater. It's not that the repeater has some amazing antenna. It's not that it's got a million dollar radio. It's that there's nothing between you on the ground, and the repeater up in space. Line of sight. So if you're able to reach a repeater 75 miles away reliably from an antenna that is 10 feet above the ground, that repeater's antenna must be at about 1050 feet above the ground between the two of you. Otherwise the curvature of the earth gets in the way. As an example, I can easily hit this repeater: But I can hit it because I live at 1600m, the repeater is at 1700m, and everything between us is at 1200m. We have line of sight. 3cRadio, SteveShannon and WRUU653 2 1 Quote
3cRadio Posted 3 hours ago Author Report Posted 3 hours ago 5 hours ago, SteveShannon said: It’s possible that it is tropospheric ducting. It’s also possible that the farther repeater’s signal is getting to you because they have a very high antenna or because it is reflecting off something or refracting over a sharp edge. And it’s also possible that the distant repeater is linked with a nearby repeater. If your radio doesn’t have a receive tone set, it won’t matter what the repeater output tone is; your radio will allow the audio to be reproduced. thanks for the reply! never hear of tropospheric ducting but after looking it up, it's very possible. supposedly in area Aug & Sept have a higher probably of this happening. i'm not familiar with the linking of repeaters but from my understanding this is considered illegal with gmrs repeater but the repeater is operated by a radio network that has a few repeater near each other; maybe they are linked somehow. my radio tones are set to 162.2 in and out, so no sure how i could hear them on the receive side; that still puzzles me. thanks again for the reply! Quote
WRXB215 Posted 3 hours ago Report Posted 3 hours ago @OffRoaderX I'm no expert but your situation sounds like it may be what's called "knife edge diffraction." Quote
3cRadio Posted 3 hours ago Author Report Posted 3 hours ago 5 hours ago, OffRoaderX said: Is there a mountain between you and the further away repeater like with the closer one? I regularly and normally connect to a repeater 69 miles away on my handheld radios and using my base-station with a big antenna on the roof, i can connect to repeaters 80 or 90 miles away - yet there are other repeaters 10 miles away that I cant connect to because of hills/mountains. thanks for the reply! there isn't a mountain as high as the closer repeater but i'm located in norcal (suburbs) and there are hills, trees and several buildings towards the further repeater; no real line of sight, open fields or deserts. if i'm correct in thinking who you are; love your vids! OffRoaderX 1 Quote
OffRoaderX Posted 2 hours ago Report Posted 2 hours ago 59 minutes ago, WRXB215 said: @OffRoaderX I'm no expert but your situation sounds like it may be what's called "knife edge diffraction." Don't try to overcomplicate everything.. It's just good line of sight.. Quote
3cRadio Posted 2 hours ago Author Report Posted 2 hours ago 6 hours ago, dosw said: You think that's amazing, consider that with a handheld Yagi antenna an amateur can talk through the International Space Station's 2m/70cm (VHF/UHF) crossband repeater using a 5w handheld radio. Five watts, to reach a repeater hundreds, even a thousand miles away. But what's different about the ISS? It's not that the repeater is a ham repeater. It's not that the repeater has some amazing antenna. It's not that it's got a million dollar radio. It's that there's nothing between you on the ground, and the repeater up in space. Line of sight. So if you're able to reach a repeater 75 miles away reliably from an antenna that is 10 feet above the ground, that repeater's antenna must be at about 1050 feet above the ground between the two of you. Otherwise the curvature of the earth gets in the way. As an example, I can easily hit this repeater: But I can hit it because I live at 1600m, the repeater is at 1700m, and everything between us is at 1200m. We have line of sight. thanks for the reply! pretty amazing that a 5w radio can make it up that far. since earth has the whole coverture thing and obstructions, i can see why it might not go as far. from what i can gather, the tower is probably approx. 2k ft elevation and i'm at 100 ft. that image is pretty cool. cant seem to find the site you were using but here's my google map image. there are some hills but no huge mountains (from what i can tell). WRUU653 1 Quote
WRXB215 Posted 1 hour ago Report Posted 1 hour ago 26 minutes ago, OffRoaderX said: Don't try to overcomplicate everything.. It's just good line of sight.. Not only that, but I also misread your post. Quote
WRUU653 Posted 1 hour ago Report Posted 1 hour ago Here is the line of sight tool. I know that area. That is a good reach for sure. SteveShannon 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.