Need a 3D belt clip for my Baofeng! Any suggestions

[Andrei]

Hi!

I am the happy owner of the Baofeng UV-9G which I like a lot. But I hate the beltclip and, besides, while I still have the screw, I lost the clip itself during a hurricane. What I am looking for would be a 3D printer belt clip which would use the screw from the original clip. And since I don't have a 3D printer I have to purchase that somewhere. Can you recommend a person or an online store which I could get such a belt clip from?  I should also clarify that I don't like Baofeng type "fat" belt clips, I am hoping to find one which can use the screw, but would remain "flat(er)" than the think Baofeng ones.  And, to clarify, I can use a search engine, the reason I ask here is to get ==>personal<== recommendations or suggestions

Thank you very much!

Edited yesterday at 08:43 PM by Andrei
explain the difference between a forum and search engine.

[amaff]

https://letmegooglethat.com/?q=uv-5r+3d+print+belt+clip

[Andrei]

there is one in each group or forum.

nice to meet you.

now I will wait for actually useful comments

[WRUU653]

You’re right that belt clip sucks. This is one on eBay, you’ll note that it doesn’t have a hinge mechanism. I just left mine off and put it in a pocket or a holder like this. 

[Andrei]

Fantastic, THANK YOU!  I already ordered the clip  and...  I also ordered the pocket holder 

thanks for your excellent suggestions!  may that good karma come right back to you!

[WRYS709]

21 hours ago, Andrei said:

there is one in each group or forum.

nice to meet you.

now I will wait for actually useful comments

Some posters do not understand the two types of people on these types of forums:

1) Those that cannot do or are unwilling to do internet research and hence prefer to be spoon fed; and 

2) Those that get personal achievement and gratification from doing research for others!

”I want my Maypo!”