fremont Posted December 6, 2020 Report Share Posted December 6, 2020 Is there a way to program a TK-7180 to move up/down by certain frequency steps, e.g., .010 MHz? I know I can scan and program specific frequencies but can I manually toggle through the frequencies? Quote Link to comment Share on other sites More sharing options...
1URFE57 Posted December 6, 2020 Report Share Posted December 6, 2020 Is there a way to program a TK-7180 to move up/down by certain frequency steps, e.g., .010 MHz? I know I can scan and program specific frequencies but can I manually toggle through the frequencies?You can program frequency steps by channel for ex. CH1 446.125 CH2 446.135 use the Zone for Channel Groups makes life easier. fremont 1 Quote Link to comment Share on other sites More sharing options...
BoxCar Posted December 7, 2020 Report Share Posted December 7, 2020 I doubt you can change the steps. The radio is probably set to step in the standard 6.25, 12.5 and 25 kHz center channel steps used in LMR. fremont 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.