I purchased my Wouxun KG-1000G in December of 2021. It is currently installed in my 2021 Subaru Crosstrek and has work wonderfully since installed,
The local Repeater that I use in the greater Tampa FL area is on Channel 24, Frequency 462.575. the Input/Output CTS codes are both 141.3 and both are entered correctly. I realize that I could leave the Rx-CTC off and everything would still work fine, but I have always programmed the Input/Output codes when known and have never had a problem.
Recently within the past week or so, I have not received any transmissions from the Repeater and when I transmit on that channel, (C24, F462.575) I do not receive a Repeater Tone "Kerchunk" as I always have and I am not receiving any transmissions when monitoring the channel.
I noticed a few days ago that on my lcd display, that the letter T is displayed prominently above the Frequency. I don't recall ever having seen this before and even after reviewing the manual, I have not been able to figure out what purpose the T serves and if it is related to my now inability to effectively transmit or receive on this repeater channel or how to make it go away in hopes that the T setting is the problem.
Sure would appreciate some thoughts on what the fix is.
You can post now and register later.
If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.
Question
SemperFiGuy
Greetings All:
I purchased my Wouxun KG-1000G in December of 2021. It is currently installed in my 2021 Subaru Crosstrek and has work wonderfully since installed,
The local Repeater that I use in the greater Tampa FL area is on Channel 24, Frequency 462.575. the Input/Output CTS codes are both 141.3 and both are entered correctly. I realize that I could leave the Rx-CTC off and everything would still work fine, but I have always programmed the Input/Output codes when known and have never had a problem.
Recently within the past week or so, I have not received any transmissions from the Repeater and when I transmit on that channel, (C24, F462.575) I do not receive a Repeater Tone "Kerchunk" as I always have and I am not receiving any transmissions when monitoring the channel.
I noticed a few days ago that on my lcd display, that the letter T is displayed prominently above the Frequency. I don't recall ever having seen this before and even after reviewing the manual, I have not been able to figure out what purpose the T serves and if it is related to my now inability to effectively transmit or receive on this repeater channel or how to make it go away in hopes that the T setting is the problem.
Sure would appreciate some thoughts on what the fix is.
Kindest regards in advance.
Best,
Gil - Largo, FL
1 answer to this question
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.