Wouxun HT cutting out

[WRUW515]

I have a Wouxun KG-UV9 Series. When I am receiving a transmission, the radio cuts out every few seconds. The RX LED indicator and audio both cut out. They only way I have been able to get this to stop is if I have both the A and B receiver set at the same frequency. Is there a setting I need to change to receive properly without having both A/B on the same frequency?

[OffRoaderX]

Does it do this on every frequency and every signal, or only some?

[WRHS218]

Are you scanning a priority channel when this is happening? You might try turning off all the scan functions just to see if that changes anything. Does this happen if you turn off TDR?

[WRUW515]

I found the problem thanks to a Facebook user.  It was a priority scan problem.  After more testing, it would work if I had the other band selected...for example A was priority, but I was receiving on B.  If I was receiving on A, and A was the band I had selected, it would cut out.  I was having this problem even when not scanning frequencies and it was doing it on all frequencies I tried it on, whether I was listening to a HAM or GMRS frequency.  Disabling priority scan solved my problem.