Danwrwf250 Posted August 14, 2023 Report Posted August 14, 2023 Need a pinout please for a Kenwood TK-8180 RX and TX radios. Building a local repeater with a Arcom RC210 controler. The 25 pin on the back of the radio's. Like the PTT on pin 4 TX radio Quote
0 Lscott Posted August 14, 2023 Report Posted August 14, 2023 https://manuals.repeater-builder.com/Kenwood/tk/TK-8180/TK-8180-8189(E)_B51-8714-00.pdf https://manuals.repeater-builder.com/Kenwood/tk/TK-8180/TK-8180_sup.pdf Quote
0 Danwrwf250 Posted August 15, 2023 Author Report Posted August 15, 2023 23 hours ago, Lscott said: https://manuals.repeater-builder.com/Kenwood/tk/TK-8180/TK-8180-8189(E)_B51-8714-00.pdf https://manuals.repeater-builder.com/Kenwood/tk/TK-8180/TK-8180_sup.pdf Quote
0 Danwrwf250 Posted August 15, 2023 Author Report Posted August 15, 2023 Sorry, that's not what I was looking for. looking for the PTT pin 4. RX audio , TX audio, COS. CTCSS Encode. ECT. Thanks Dan W5DBH Quote
0 gortex2 Posted August 15, 2023 Report Posted August 15, 2023 Did you look at the manual posted ? J701 (25 Pin DB25) descriptions are on page 52 of the service manual. RX Audio, TX Audio as well as AUX I/O ports are all there. Those I/O ports need programmed in the radio for the what you want. SteveShannon and Lscott 2 Quote
Question
Danwrwf250
Need a pinout please for a Kenwood TK-8180 RX and TX radios. Building a local repeater with a Arcom RC210 controler.
The 25 pin on the back of the radio's. Like the PTT on pin 4 TX radio
4 answers to this question
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.