Jump to content
  • 0

Motorola CDM1550+ Power supply install for home base.


ADKNY98

Question

2 answers to this question

Recommended Posts

  • 0
50 minutes ago, ADKNY98 said:

I bought a Motorola CMD1550+. I di have a new 30amp power supply. Are there any videos or step by step instructions to install the radio onto the power supply? I've searched and I can't find hardly anything.  I thank you in advance. 

Positive/red wire from the radio to the positive or plus post/contact on the power supply and the negative/black wire from the radio to the negative/minus/ground post/contact on the power supply.

Link to comment
Share on other sites

  • 0

Astron makes a nice power supply that is specific for the Motorola CDM radios. I believe the model number is astron SS-25CDM. If you are patient you can find them on eBay for around $150 or you can find brand new old stock online for around $220. 

Here's my setup. I did upgrade to the astron ss-25 with the meters. Also have a back up battery setup that charges the battery from the power supply plus switches over with out missing a beat if I lose power. 

IMG_20230814_163450.jpg

IMG_20230814_163522.jpg

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Answer this question...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Guidelines.