I have a KG-1000g that has been mounted in my truck for about a year (purchased in July, installed in August 2022). I recently noticed that it wasn’t receiving any transmissions on the “B” side but “A” was functioning normally. If i put “A” and “B” on the same channel, “A” would show that its receiving a transmission with audio coming through the speaker but “B” showed that it wasn’t receiving and no audio. I first did some testing with a handheld on simplex and found that it is transmitting on “B” just fine but not receiving transmissions. I tuned “B” to an NOAA frequency and it was receiving that great so it’s obviously capable of receiving and not a speaker issue.
While further troubleshooting, “A” was set to GMRS CH-21 and “B” was set to the NOAA Frequency, I could continue hearing the NOAA transmission but when attempting to do a radio check with my handheld on “A”, the KG-1000 could receive on “A” but not transmit. I had to get “B” out of VFO and back onto a GMRS frequency in which case “A” would go back to normal.
I contacted BTWR to try and troubleshoot further:
Write default file provided by them to radio - No Change
Factory Rest - No Change
Connect the remote faceplate using shorter cable - No Change
It was at this point that they told me that they didn’t know what was going on and since I was about a month out of warranty, nothing they could do. Anyone else encounter this issue or have any ideas?
You can post now and register later.
If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.
Question
StreetMedic03
I have a KG-1000g that has been mounted in my truck for about a year (purchased in July, installed in August 2022). I recently noticed that it wasn’t receiving any transmissions on the “B” side but “A” was functioning normally. If i put “A” and “B” on the same channel, “A” would show that its receiving a transmission with audio coming through the speaker but “B” showed that it wasn’t receiving and no audio. I first did some testing with a handheld on simplex and found that it is transmitting on “B” just fine but not receiving transmissions. I tuned “B” to an NOAA frequency and it was receiving that great so it’s obviously capable of receiving and not a speaker issue.
While further troubleshooting, “A” was set to GMRS CH-21 and “B” was set to the NOAA Frequency, I could continue hearing the NOAA transmission but when attempting to do a radio check with my handheld on “A”, the KG-1000 could receive on “A” but not transmit. I had to get “B” out of VFO and back onto a GMRS frequency in which case “A” would go back to normal.
I contacted BTWR to try and troubleshoot further:
Write default file provided by them to radio - No Change
Factory Rest - No Change
Connect the remote faceplate using shorter cable - No Change
It was at this point that they told me that they didn’t know what was going on and since I was about a month out of warranty, nothing they could do. Anyone else encounter this issue or have any ideas?
0 answers to this question
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.