Radio Won't Receive After Transmitting

[mellowcream]

Hello All,

My Luiton LT-925UV will not receive for about 6-10 seconds after transmitting. When the radio sits idle, it receives fine.  But after transmitting, it will not receive any signal for about 6 seconds. I've never cam across something this bizarre before.  Any ideas?

Thanks

[cdlale]

On my Baofeng UV82 I had to turn off the 2 squelch tail eliminator settings to prevent tx to rx delay when I transmit into my repeater or on simplex. Mine would delay serveral seconds depending on the setting. The squelch tail eliminator on these china made radios don't work on the USA analog PL tone standard.

[mellowcream]

On my Baofeng UV82 I had to turn off the 2 squelch tail eliminator settings to prevent tx to rx delay when I transmit into my repeater or on simplex. Mine would delay serveral seconds depending on the setting. The squelch tail eliminator on these china made radios don't work on the USA analog PL tone standard.

What settings did you change?

[cdlale]

The settings are RPT-RL is off and RP-STE is off. I think I turned STE (menu 35) off.

[cdlale]

I looked at the manual on your radio. Check to see if vox is turned off. Also try turning off tail elimination.