Unable to Test Kerchunk Local Repeater.(Uv-5r Gmrs Version)New to Hobby.

[WSCP212]

GoodMorning, New to the Hobby. I Set Frequency  in VFO Mode, Set Shift-D to +, Set Offset to 5.000Mhz, Set T-DCS to Specified Tone, Delete Channel 37 Memory, Save to Channel 37 Memory, go to Channel Mode, and Test for Kerchunk.  But instead of a momentary Squelch after letting go of the PTT Button, a Single Beep is heard. What am I doing wrong? Tried Repeater Channel 4(based on Frequency Chart), Tried with or without  R-DCS Tone, Tried Setting same Frequency in Both A/B.  

[UncleYoda]

Channels 31 and above are receive only.    It's described that way on the Amazon page, and it's the same for my UV5G.  Typically for these GMRS radios YOU JUST ENTER TONES ON THE PRE-PROGRAMMED CHANNELS (1-22 simplex, 23-30 repeater).

[WSCP212]

Thanks Unc! I Set everything to Specified Frequency Channel 16.  Now, Im able to hear the momentary squelch after letting go of the PTT Button(Kerchunk). Also Set Roger Tone off. So It Seems to Be Working at the moment. Thanks again!