GMRS Radios Connectivity Issues Despite Identical Settings

[WSGD716]

Note to Administrator: I have the same post on another Forum (Technical Discussion), if it is not allowed, please remove it.

My two GMRS radios can connect to the repeater and communicate with other users, but they cannot hear each other.

Even when I took both radios 100 meters from the repeater, they still couldn't hear each other.

Both radios are identical, and I used the programming software to update them with the same settings.

I have even replaced my radios, thinking that might resolve the issue. 

·         Radioddity GM-30 Plus GMRS Radio (current one)

Here are my channels 23 to 30 settings which I got permission for:

Channel                Frequency                           Name                                    Tone

23           462.5500 / 467.5500      RPT-1    GCR 550 Spanish Fort     141.3 Hz / 141.3 Hz

24           462.5750 / 467.5750      RPT-2    GCR 575 Semmes            100 / 100 Hz

25           462.6000 / 467.6000     RPT-3    GCR 600 Perdido Beach 141.3 Hz / 141.3 Hz

26           462.6250 / 467.6250     RPT-4    GCR 625 BAY MINET       141.3 Hz / 141.3 Hz

27           462.6500 / 467.6500     RPT-5    GCR 650 Fairhope            67.0 Hz / 67.0 Hz

28           462.6750 / 467.6750     RPT-6    GCR 725 New Orleans     141.3 Hz / 141.3 Hz

29           462.7000 / 467.7000     RPT-7    Spanish Fort Hgh School 141.3 Hz / 141.3 Hz

30           462.7250 / 467.7250     RPT-8    GCR 725 Theodore, Al     141.3 Hz / 141.3 Hz

I appreciate any suggestions you may have.

[WSGD716]

23 hours ago, OffRoaderX said:

How far apart are the two radios from each other when you are testing?

 

[WSGD716]

Note to Administrator: I have the same post on another Forum (Technical Discussion), if it is not allowed, please remove it.

Dear OffRoaderX,

Thank you for your input. If you don’t mind, I’d like to continue this discussion on another (Technical Discussion) forum.

Best regards,