TidRadio TdH3 dual band watch? Problem? *SOLVED

[GrouserPad]

My Gmrs TDH3: I’ve got menu 36 Sync ON. The radio displays the a/b bands in the bottom left corner of screen. If I select two different channels say for instance; gmrs channel 8 for(a) and ch-011 for(b) then this radio “should” monitor both a and b right?!  I tested this theory by taking a separate ht and tx to each channel with the tdh3 on standby and only the selected channel will RX the signal from my other ht. It’s as if the dual watch isn’t working on the TidRadio.

 

Hopefully this isn’t too confusing how I have explained this. Thank you. and may I add on my Baofeng uv5gPlus whatever is in band a or b is always monitored and Rx’s either frequency just fine. And my tdh3 tx’s to it fine and it recognizes the two different channels or freqs quickly. I want my tdh3 to respond the same but it doesn’t. It only Rx’s the 1 channel that is selected by the a/b

 

[LeoG]

It should have a dual watch.  Mine works fine.  Are you sure you don't have an RX tone on the receiver?  Make sure the RX CTCSS and RX DCS are both set to off.

[GrouserPad]

3 minutes ago, LeoG said:

It should have a dual watch.  Mine works fine.  Are you sure you don't have an RX tone on the receiver?  Make sure the RX CTCSS and RX DCS are both set to off.

Yes, all off. Just checked. Thanks. 

[LeoG]

Have you tried other channels besides those two?  Odd it's displaying it two different ways.

[RIPPER238]

You don't have the dual watch on. Duel circular arrows. 

#9 D.Wait needs to be on. 

No Idea why they called it D.Wait

[GrouserPad]

18 minutes ago, RIPPER238 said:

You don't have the dual watch on. Duel circular arrows. 

#9 D.Wait needs to be on. 

No Idea why they called it D.Wait

THATS IT. THAT FIXED IT! Thank you so much Ripper *fistbump