WSGM518 Posted February 24 Report Posted February 24 Hello everyone, I own a Wouxun KG-935G Plus radio and bought a Baofeng UV-9G for back-up and for my wife to use. It was working fine until yesterday when the battery got low it starting making a noise. Now it doe not receive or transmit. Any ideas on what this could be? Thank you. Quote
2 Jaay Posted February 24 Report Posted February 24 1 hour ago, OffRoaderX said: My guess is the battery needs to be charged. Did you charge the battery back up? On a different note, Can you tell me if the 935G has a Mic Gain setting Or a Squelch tail setting in the menu ? I'm curious, because it's two features I wish they would have included in the 935H. Two different radios, I know but still similar. Quote
0 OffRoaderX Posted February 24 Report Posted February 24 My guess is the battery needs to be charged. Did you charge the battery back up? Quote
0 SteveShannon Posted February 24 Report Posted February 24 14 minutes ago, Jaay said: On a different note, Can you tell me if the 935G has a Mic Gain setting Or a Squelch tail setting in the menu ? I'm curious, because it's two features I wish they would have included in the 935H. Two different radios, I know but still similar. I gave you an up-vote. SoCalGMRS voted you down just so he wouldn’t be at the bottom. The word “Gain” doesn’t appear in the manual for the 935g. Squelch tail is referred to in menu #51, aka RPT-TONE. Here’s what it says: Enables or disables the squelch tail sent to the receiving radio. Quote
0 Jaay Posted February 24 Report Posted February 24 43 minutes ago, SteveShannon said: I gave you an up-vote. SoCalGMRS voted you down just so he wouldn’t be at the bottom. The word “Gain” doesn’t appear in the manual for the 935g. Squelch tail is referred to in menu #51, aka RPT-TONE. Here’s what it says: Enables or disables the squelch tail sent to the receiving radio. Ok, thanks for that Steve. I'll look at #51 and see if it makes any difference. My 935 H has a real obvious tail, even with the squelch up to 9. Quote
0 SteveShannon Posted February 25 Report Posted February 25 19 minutes ago, Jaay said: Ok, thanks for that Steve. I'll look at #51 and see if it makes any difference. My 935 H has a real obvious tail, even with the squelch up to 9. It’s menu #59 for the 935h: WRUU653 and Jaay 1 1 Quote
Question
WSGM518
Hello everyone,
I own a Wouxun KG-935G Plus radio and bought a Baofeng UV-9G for back-up and for my wife to use.
It was working fine until yesterday when the battery got low it starting making a noise. Now it doe not receive or transmit.
Any ideas on what this could be?
Thank you.
5 answers to this question
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.