IF YOU NEED ANY SUPPORT ON PROGRAMMING YOUR RADIOS, PLEASE CONTACT ME AT wrmz361@gmail.com. DONT SHARE ANY INFORMATION ABOUT THE BROADNET REPEATER SYSTEM INFORMATION IN SOCIAL MEDIA ETC.
ANY INFO SEND EMAIL TO wrmz361@gmail.com IF YOU NEED GOOD MOTOROLA UHF RADIO FOR GMRS, I RECOMMEND THIS SELLER ON EBAY. I BUY MY RADIOS FROM HIM.
MOTOROLA XTL2500 50watts P-25 Do 5 Kilohertz &4-3- This is a real good radio.
https://www.ebay.com/itm/285738342625?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=5A7yA-99QAa&sssrc=2349624&ssuid=u3st-bffsww&var=&widget_ver=artemis&media=COPY
I saw a video on YouTube with 2 MCS200 for a Repeater. Here is the link. By the way, Those radios are pretty good. I got 3 , 1 50 w & 2 -25w. The CPS Channel configuration is a little complicated.
This is WRMZ361-KE2AUM FROM BROADNET GMRS REPEATER SYSTEM IN NYC.
A lot of people have Repeaters without add info online.The best Repeater in NYC is not listed online end this repeater is located on Rockefeller building in NYC and is one of the most silent in the Tri state area. WRMZ361-KE2AUM ????
The best GMRS Antenna I ever have is the Ed Fong GMRS jpole Antenna. I recommend and the prices is very cheap, compared with others GMRS Antenna in the market. Only need is a pvc psi 200 of 3 ft and good coax cable. I use LMR-400 with that antenna my SWR is 1.1. Get a Mobil radio(50w) with 20 amp power supply and you not need anything else. Good luck brother
Hi everyone. I am try to tune this antenna, but I am little lost on the chart. I want tune for GMRS. Right now the SWR is too high(4.5) if anyone help me to read the chart to get the right measurements.
https://www.repeater-builder.com/antenna/pdf/tram-1485.pdf
Thanks
Hi guys. I have the SW-102 ver.5.1 and i read my XPR5550 UHF radio but reading was wrong. Can someone help me how to calibrate the manu.Adj Fw-RW- adj Freq- Adj PWR+. I buy this 5550 and I want to check my SWR Etc. Thanks guys
Right now, Nothing. I only have Radios, Antenna , cables power supply. Just the simple. That the hard part for me, because I never built a repeater by myself. I think I need like a ( LIST TO BUY) I got 4 radios. 2 MCS2000 40-50 w and 2- XTL2500
Hi everyone and Thanks for always support me with your knowledge. I want to build a repeater with MCS2000 UHF radios. I don’t want make a mistake on this. Are this cable the right one? Because I know is use for Pyramide mobile repeater too.
Thank you guys.
I know that site of repeater, but I don’t have the knowledge of cable on pin,etc. If you guys help me, when came to NYC , are welcome to use or by online. I have plan to fix all that later…?