KG-905G - can't get the LCD Display to show GMRS ## anymore

[mikeGMRS25]

I was setting the tones for a local GMRS repeater and had to switch to DCS selection using the PF2 key. I got that done but now the LCD display doesn't show the normal GMRS channel number. Instead it shows 462.575

Also, if this is related, the top line says S W then CH- 02   G-03

How do I get the frequency off the display and go back to the GMRS number label?

[OffRoaderX]

There is a setting in the menus - i dont recall the name but you will find it in your user-manual. That setting sets the screen to show channel number, name, or frequency..  

This is ASSUMING you are back in channel mode. Make sure you are in channel mode.

[mikeGMRS25]

14 hours ago, OffRoaderX said:

There is a setting in the menus - i dont recall the name but you will find it in your user-manual. That setting sets the screen to show channel number, name, or frequency..  

This is ASSUMING you are back in channel mode. Make sure you are in channel mode.

that did it, thank you