ICOM F2000

[MIKEROD67X]

Does anyone have any advice on the Icom F2000. Just got one for $75.00 on eBay. Can it be programed using Chirp? Is it a good radio for Gmrs.. It is Uhf 450-512 Thanks in advance 

[JohnE]

its a good basic hand held

[gman1971]

With a pretty decent receiver. That radio should not be bothered much by intermod issues... good choice.

 

Unfortunately I don't know much about that radio, but just like JohnE stated, it appears like its a good handheld.

 

G.

[WRAK968]

They are great little radios though the accessorys are a lil pricy. Chirp will NOT program these radios, you will need Icoms CS-F2000 software and a cable. The software is usually $45-55 depending on if you get a dowloaded version, or a CD, or CD with programing cable. Work got the cable and software from here:

https://www.theantennafarm.com/catalog/cs-f1000-2000-usb-7705

So if you need the cable and software, and everything to work on windows 10, I can say this will work for you.

[MIKEROD67X]

its a good basic hand held

Thank you

[MIKEROD67X]

With a pretty decent receiver. That radio should not be bothered much by intermod issues... good choice.

 

Unfortunately I don't know much about that radio, but just like JohnE stated, it appears like its a good handheld.

 

G.

Thanks its a solid radio  waiting on the cable i ordered and software 

[MIKEROD67X]

They are great little radios though the accessorys are a lil pricy. Chirp will NOT program these radios, you will need Icoms CS-F2000 software and a cable. The software is usually $45-55 depending on if you get a dowloaded version, or a CD, or CD with programing cable. Work got the cable and software from here:

 

https://www.theantennafarm.com/catalog/cs-f1000-2000-usb-7705

 

So if you need the cable and software, and everything to work on windows 10, I can say this will work for you.

Thank you i ordered that and it should be here today thanks again