Jump to content
  • 0

New Guy Question about Repeaters


ThunderBear

Question

6 answers to this question

Recommended Posts

  • 0
27 minutes ago, ThunderBear said:

What does the "G-2" designate in the repeater name. Seen others as "G-7". I tried to search for this, but apparently my Google-Fu was not strong enough...
Is it a regional thing? I'm in central WA State

Normally, the repeater name is whatever the owner decided to call it. G-2 or G-7 in the name would most likely be something meaningful to the repeater owner, possibly a regional designation, but it doesn't necessarily have a common meaning. If we know what repeater you're referring to, it's possible someone in the vicinity of it might know.

 

Edited to add:

Actually, after reading the descriptions of two repeaters in the East Wenatchee area, I think I may have figured out what was meant by G-2, G-7, etc. It looks like they refer to the 8 GMRS repeater pairs (the frequencies used by GMRS repeaters).

G-1 would be the .550 frequencies (462.550/467.550);  G-2, .575;  G-3, .600;  G-4, .625;  G-5, .650;  G-6, .675;  G-7, .700;  G-8, .725

Link to comment
Share on other sites

  • 0

Based on the descriptions, it looks like the repeaters are part of a linked network, and those are just a form of numbering the nodes on the network.

i also found G-5 Spokane Mountain G-5

the repeaters i think the OP is referring to are:

East Wenatchee 700 G-7

East Wenatchee 575 G-2

Link to comment
Share on other sites

  • 0
4 minutes ago, wayoverthere said:

Based on the descriptions, it looks like the repeaters are part of a linked network, and those are just a form of numbering the nodes on the network.

i also found G-5 Spokane Mountain G-5

the repeaters i think the OP is referring to are:

East Wenatchee 700 G-7

East Wenatchee 575 G-2

I found a G3 and G6 in Moses Lake, and another G6 in Lake Chelan. In Seattle, the just used Seattle #1, Seattle #2, (and 4, 6, and 8). The numbers used corresponded to the repeater pairs 1 - 8 in all those instances, so I'm assuming that is what the owners of the repeaters intended.

Link to comment
Share on other sites

  • 0
9 minutes ago, WyoJoe said:

I found a G3 and G6 in Moses Lake, and another G6 in Lake Chelan. In Seattle, the just used Seattle #1, Seattle #2, (and 4, 6, and 8). The numbers used corresponded to the repeater pairs 1 - 8 in all those instances, so I'm assuming that is what the owners of the repeaters intended.

Good point...that makes a little more sense why there's more than one G6.

Link to comment
Share on other sites

  • 0
On 9/12/2021 at 11:30 PM, wayoverthere said:

Based on the descriptions, it looks like the repeaters are part of a linked network, and those are just a form of numbering the nodes on the network.

i also found G-5 Spokane Mountain G-5

the repeaters i think the OP is referring to are:

East Wenatchee 700 G-7

East Wenatchee 575 G-2

Yes, these were a couple in particular that I saw. I was also listing the other night and hearing people talking about putting up more repeaters using other G numbers.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Answer this question...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Guidelines.