Blake5683 Posted January 17, 2022 Report Share Posted January 17, 2022 New to GMRS and trying to figure out how to get connected to Lemmon 650. Any help would be appreciated. Blake WROK278 Quote Link to comment Share on other sites More sharing options...
gortex2 Posted January 17, 2022 Report Share Posted January 17, 2022 Did you go to the page for the repeater and request access ? https://mygmrs.com/repeater/3478 Quote Link to comment Share on other sites More sharing options...
JeepCrawler98 Posted January 18, 2022 Report Share Posted January 18, 2022 (edited) There’s a link in the listing to sign up with the SWCRS; once someone in the admin team reviews your application you’re sent a link with a password that will give you the info to all machines on the network, including the Lemmon 650. We centrally manage access to all machines as opposed to on a per repeater basis, otherwise we’re constantly inundated with requests for each one considering there’s a good number of them we look after. Edited January 18, 2022 by JeepCrawler98 Quote Link to comment Share on other sites More sharing options...
Blake5683 Posted January 18, 2022 Author Report Share Posted January 18, 2022 Thanks gortex2 and jeepcrawler98, I fill out the application for SWCRS. Blake49 WROK278 Quote Link to comment Share on other sites More sharing options...
WRFS422 Posted January 24, 2022 Report Share Posted January 24, 2022 @JeepCrawler98 I’m a casual GMRS user and the Lemmon 650 has been my go to repeater. Unfortunately, I have a midland mxt 115 which does not support the most recent change to the tone scheme for the repeater. What was the reason for the change and will this be the same in the future for the Lemmon 650? Thanks in advance Quote Link to comment Share on other sites More sharing options...
JeepCrawler98 Posted January 24, 2022 Report Share Posted January 24, 2022 (edited) @WRFS422 We had some persistent issues with less than savory folks getting in there and causing trouble; the PL on Lemmon has been changed in the past because of this but with non-split tones of course it’s not difficult to force your way back in. The tone scheme implemented now is permanent; we always try to make it as easy as possible to get on the machines so long as it stays clean - unfortunately we had to implement the scheme we have now to keep the riffraff off. Edited January 24, 2022 by JeepCrawler98 Quote Link to comment Share on other sites More sharing options...
WRFS422 Posted January 26, 2022 Report Share Posted January 26, 2022 @JeepCrawler98 I suspected that was why the system was switched to split tones. I completely understand and appreciate the steps you've taken to keep the system free of interference and riffraff. I'm still able to hit the Tucson 550 to get into the linked system, although there is some static. I'm also still able to use the stand alone repeater on Mt. Lemmon to talk to local folks. Maybe, I'll look at getting a radio that is capable of split tones in the near future without spending a ton of dough even though that's the nature of this hobby. Thanks for the info. Quote Link to comment Share on other sites More sharing options...
MichaelLAX Posted January 26, 2022 Report Share Posted January 26, 2022 4 hours ago, WRFS422 said: Maybe, I'll look at getting a radio that is capable of split tones in the near future without spending a ton of dough even though that's the nature of this hobby. Radioddity DB20-G: $109, cigarette lighter plug, 20 watts, programmable channels and split tones. Clone Anytone AT-779UV shown - $99 Quote Link to comment Share on other sites More sharing options...
WRFS422 Posted January 26, 2022 Report Share Posted January 26, 2022 @MichaelLAXThanks for the recommendation Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.