I have an RT97s as my repeater. It does not like to work with my ID O Matic Controller so I ended up send beacons every 15 minutes that I can power off and on remotely. My pair of motos did not have an issue with the controller but I discovered other challenges I will address after next spring with the motos again.
It does not play well with the RT97s either so I built a repeater from a pair of moto CDM1550's but I experienced desencing issues. I want to use one of the pairs to link the RT97s to the network. I ordered a rim lite (direct from repeater builder) as one of my last efforts to get it linked without the moto.
On the moto, I can hear tones when testing the audio using sudo simple usb-tune-menu , and can hear a beep when the controller starts up and registers a kerchunk.
I can't get the audio in to work with the sound card. I was thinking it had something to do with the tones and the repeater. After several attempts changing carrierfrom, ctcssfrom and duplex I don't know what else to do.
Do I have wonky hardware at this point since I had issues with linking my RT97s (using the RT97 image) and my id o matic? What's weird is that existing sound card registers the RT97 audio in per the LED but not on the moto.
My end goal is getting the RT97 linked directly or though the moto (least desirable). I know it's not commercial hardware but I did learn a hell of a lot about this infrastructure that I find intriguing. I will save up for a commercial repeater, but some of those have 2 mobile radios inside leading me to build my own.
You can post now and register later.
If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.
Question
HrXkb3UjmgFvBe
I have an RT97s as my repeater. It does not like to work with my ID O Matic Controller so I ended up send beacons every 15 minutes that I can power off and on remotely. My pair of motos did not have an issue with the controller but I discovered other challenges I will address after next spring with the motos again.
I ordered this https://shop.mygmrs.com/collections/repeater-accessories/products/repeater-builder-rim-maxtrac-usb-radio-interface
It does not play well with the RT97s either so I built a repeater from a pair of moto CDM1550's but I experienced desencing issues. I want to use one of the pairs to link the RT97s to the network. I ordered a rim lite (direct from repeater builder) as one of my last efforts to get it linked without the moto.
On the moto, I can hear tones when testing the audio using sudo simple usb-tune-menu , and can hear a beep when the controller starts up and registers a kerchunk.
I can't get the audio in to work with the sound card. I was thinking it had something to do with the tones and the repeater. After several attempts changing carrierfrom, ctcssfrom and duplex I don't know what else to do.
I saw documentation for a similar radio for an allstar station for ham's https://www.parkerradio.org/community/projects/allstar-node-from-motorola-cdm-1250-radio/
and read up on getting started with allstar WIKI without any progress.
Do I have wonky hardware at this point since I had issues with linking my RT97s (using the RT97 image) and my id o matic? What's weird is that existing sound card registers the RT97 audio in per the LED but not on the moto.
My end goal is getting the RT97 linked directly or though the moto (least desirable). I know it's not commercial hardware but I did learn a hell of a lot about this infrastructure that I find intriguing. I will save up for a commercial repeater, but some of those have 2 mobile radios inside leading me to build my own.
Link to comment
Share on other sites
2 answers to this question
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.