wouxun kg-1000g plus transmit beeping and end of transmission

[WRWC491]

When I key up my mic it creates 4 beeps and also after I let go of the ptt button but only can hear it on a receiving radio. I've made sure the roger beep is turned off everything else other then scanning options is how it came shipped new. I've read flipped through the manual but cant seem to narrow it down and its super annoying. 

[nokones]

Go into the DTMF-ID in the radio menu and select off.

[SteveShannon]

2 minutes ago, WRWC491 said:

When I key up my mic it creates 4 beeps and also after I let go of the ptt button but only can hear it on a receiving radio. I've made sure the roger beep is turned off everything else other then scanning options is how it came shipped new. I've read flipped through the manual but cant seem to narrow it down and its super annoying. 

Look to see what your settings are for ANI. 

[WRWC491]

Ani-sw is currently on.

[WRUU653]

4 minutes ago, WRWC491 said:

Ani-sw is currently on.

turn it off, if you want beeping to stop that is 

[WRWC491]

14 minutes ago, nokones said:

Go into the DTMF-ID in the radio menu and select off.

That worked thank you it was driving me nuts. For some reason I don't see that in the programming on the computer.

[nokones]

12 hours ago, WRWC491 said:

That worked thank you it was driving me nuts. For some reason I don't see that in the programming on the computer.

And you won't see the option to turn that feature on or off in the programming software. You will see what ID is being transmitted in the software and have the ability to change the ID.