wouxun kg-1000g plus transmit beeping and end of transmission

[WRWC491]

When I key up my mic it creates 4 beeps and also after I let go of the ptt button but only can hear it on a receiving radio. I've made sure the roger beep is turned off everything else other then scanning options is how it came shipped new. I've read flipped through the manual but cant seem to narrow it down and its super annoying. 

[nokones]

Go into the DTMF-ID in the radio menu and select off.

[SteveShannon]

  On 2/11/2023 at 11:09 PM, WRWC491 said:

When I key up my mic it creates 4 beeps and also after I let go of the ptt button but only can hear it on a receiving radio. I've made sure the roger beep is turned off everything else other then scanning options is how it came shipped new. I've read flipped through the manual but cant seem to narrow it down and its super annoying. 

Expand  

Look to see what your settings are for ANI. 

[WRWC491]

Ani-sw is currently on.

[WRUU653]

  On 2/11/2023 at 11:21 PM, WRWC491 said:

Ani-sw is currently on.

Expand  

turn it off, if you want beeping to stop that is 

[WRWC491]

  On 2/11/2023 at 11:12 PM, nokones said:

Go into the DTMF-ID in the radio menu and select off.

Expand  

That worked thank you it was driving me nuts. For some reason I don't see that in the programming on the computer.

[nokones]

  On 2/11/2023 at 11:28 PM, WRWC491 said:

That worked thank you it was driving me nuts. For some reason I don't see that in the programming on the computer.

Expand  

And you won't see the option to turn that feature on or off in the programming software. You will see what ID is being transmitted in the software and have the ability to change the ID.