CHIRP Settings

[DIHOWARD61]

I was wondering about the columns in chirp. Tone Mode, Cross Mode.

I have the frequency, Tx and Rx tones, from the owner who has recently split the tones.

The screenshot below is from my config page. Are these setting correct?

 

[back4more70]

19 minutes ago, DIHOWARD61 said:

I was wondering about the columns in chirp. Tone Mode, Cross Mode.

I have the frequency, Tx and Rx tones, from the owner who has recently split the tones.

The screenshot below is from my config page. Are these setting correct?

 

I'm not sure how to answer, but maybe this would help.

https://chirp.danplanet.com/projects/chirp/wiki/MemoryEditorColumns

[SteveShannon]

1 hour ago, DIHOWARD61 said:

I was wondering about the columns in chirp. Tone Mode, Cross Mode.

I have the frequency, Tx and Rx tones, from the owner who has recently split the tones.

The screenshot below is from my config page. Are these setting correct?

 

Those look correct if the repeater owner uses DTCSS on both transmit and receive and neither is inverted. I’m assuming that you entered the correct values. 
It’s not really necessary to have a value for receiving. If you leave it out you’ll receive everything on that frequency. Sometimes that is useful while making sure your transmitter is configured correctly. Then you can always go back and enter a code/tone for receiving.