Jump to content

Recommended Posts

Posted

Hello, my new call is Wsah394

I have permission  for a local repeater with tones and codes.

They hear me kurchuck the repeater but with no  audio.   My base station has 50 watts.  

I posted this issue on a GMRS Facbook group with 40 comments,  however the error has not been corrected.

I'm looking for any ideas that may help.

Thanks for your attention and assistance.

Frank WSAH394 

Posted

So, just for deconfuckulation porpoises:  You pull the talk-trigger and you speak into the microphone, but nobody is hearing what you say on the repeater, even though you are hitting the repeater and getting the kerchunk?

If that is what you are saying, can people hear you on simplex?

If that is not what you are saying, then please try again.

 

Posted
11 minutes ago, WRXB215 said:

@WSAH394 Your post is a little confusing. By definition "kerchunking" means keying without saying anything. Are you saying that you are "activating" the repeater and speaking with no audio?

I speak, but they do not hear me.  

Posted
9 minutes ago, OffRoaderX said:

So, just for deconfuckulation porpoises:  You pull the talk-trigger and you speak into the microphone, but nobody is hearing what you say on the repeater, even though you are hitting the repeater and getting the kerchunk?

If that is what you are saying, can people hear you on simplex?

If that is not what you are saying, then please try again.

 

I have found anyone on simplex to test.  

Posted
17 minutes ago, OffRoaderX said:

So, just for deconfuckulation porpoises:  You pull the talk-trigger and you speak into the microphone, but nobody is hearing what you say on the repeater, even though you are hitting the repeater and getting the kerchunk?

If that is what you are saying, can people hear you on simplex?

If that is not what you are saying, then please try again.

 

I have confirmed  my HTS work without issue on GMRS simplex,  however my base station has no audio to the local GMRS repeater 

Posted
7 minutes ago, WSAH394 said:

I have confirmed  my HTS work without issue on GMRS simplex,  however my base station has no audio to the local GMRS repeater 

 

29 minutes ago, OffRoaderX said:

So, just for deconfuckulation porpoises:  You pull the talk-trigger and you speak into the microphone, but nobody is hearing what you say on the repeater, even though you are hitting the repeater and getting the kerchunk?

If that is what you are saying, can people hear you on simplex?

If that is not what you are saying, then please try again.

 

Sorry for the confusion,  I have confirmed that I have no  transmit audio on my base station radio even on  GMRS simplex.    Now I  am really at a loss. 

Posted

We had a guy who was trying to transmit to our repeater. We could hear him activate the repeater because his radio was set up with a Roger beep but no voice. 
In his case his external microphone jack contacts had failed open. With an external mike we hear him but trying to use the internal mike means no audio.

We had another guy whom we could barely hear. In his case the single hole in his microphone was plugged with something. 

Posted
1 hour ago, WSAH394 said:

Sorry for the confusion,  I have confirmed that I have no  transmit audio on my base station radio even on  GMRS simplex.    Now I  am really at a loss. 

Its broken. Send it back to the guy you bought it from and tell him to send you one that works.

Posted
3 hours ago, WSAH394 said:

I speak, but they do not hear me. 

Sounds like my kids... But seriously, what kind of radio is your base station? Sometimes, knowing that will help someone here evaluate the problem. 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Guidelines.