Gnarlykaw Posted April 23 Report Share Posted April 23 I dont remember this column a couple of months ago?? 5.0, 12.5, 25??? is this the same as wide and narrow band on radio?? Quote Link to comment Share on other sites More sharing options...
SteveShannon Posted April 23 Report Share Posted April 23 18 minutes ago, Gnarlykaw said: I dont remember this column a couple of months ago?? 5.0, 12.5, 25??? is this the same as wide and narrow band on radio?? No, I think it’s going to be the increment of change in frequency when you are in VFO mode and go up or down in frequencies. It isn’t relevant for GMRS. WRXB215, Sab02r and WRHS218 3 Quote Link to comment Share on other sites More sharing options...
Gnarlykaw Posted April 23 Author Report Share Posted April 23 So, it makes NO difference of any value thats placed in it? This column just came up in the lastest build. interesting fact though, those values coinside with either narrow band or wide band..... 5 or 12.5.... Quote Link to comment Share on other sites More sharing options...
OffRoaderX Posted April 23 Report Share Posted April 23 3 minutes ago, Gnarlykaw said: So, it makes NO difference of any value thats placed in it? Yes, it makes a difference if you are in VFO mode and going up or down in frequency. It is not relevant to transmitting on GMRS but it is relevant for receiving frequencies in VFO mode..and tuning up or down in frequency. WRXB215 and SteveShannon 2 Quote Link to comment Share on other sites More sharing options...
SteveShannon Posted April 23 Report Share Posted April 23 10 minutes ago, Gnarlykaw said: So, it makes NO difference of any value thats placed in it? This column just came up in the lastest build. interesting fact though, those values coinside with either narrow band or wide band..... 5 or 12.5.... I didn’t say that it makes no difference. As Randy said it can definitely make a difference in receiving. Also, remember that Chirp is used for many different radios used in different services and the table of data used by Chirp must have a slot for more information than just what’s needed for a GMRS radio. It really depends on the radio features and how they’re implemented. And yes, especially for amateur radios that do not have defined channels, the step size should coincide with the bandwidth of the transmission. Quote Link to comment Share on other sites More sharing options...
WRXR255 Posted April 23 Report Share Posted April 23 At least that gives you an adjustable stepping ability. My County Comm GP-5/SSB receiver has only two modes I can figure out. Turn the tuning wheel fast, it advances 5 Mhz, slow turn its 1Mhz. and no way to direct input a freq. I need to dig online and find the manual though, I might be wrong. . Quote Link to comment Share on other sites More sharing options...
SteveShannon Posted April 23 Report Share Posted April 23 1 minute ago, WRXR255 said: At least that gives you an adjustable stepping ability. My County Comm GP-5/SSB receiver has only two modes I can figure out. Turn the tuning wheel fast, it advances 5 Mhz, slow turn its 1Mhz. and no way to direct input a freq. I need to dig online and find the manual though, I might be wrong. . 5 MHz fast and 1 MHz slow? How did you get 28.300 MHz? Or did it start at 0.300 MHz? Quote Link to comment Share on other sites More sharing options...
WRXR255 Posted April 23 Report Share Posted April 23 1 minute ago, Sshannon said: 5 MHz fast and 1 MHz slow? How did you get 28.300 MHz? Or did it start at 0.300 MHz? My display has no "." so its showing 28300 kHz... I screwed up the MHz / KHz its showing - dont have my glasses right now. SteveShannon 1 Quote Link to comment Share on other sites More sharing options...
SteveShannon Posted April 23 Report Share Posted April 23 Just now, WRXR255 said: My display has no "." so its showing 28300 kHz... I screwed up the MHz / KHz its showing - dont have my glasses right now. So it really changes 5 kHz on fast and 1khz on slow, right? That probably takes forever to sweep from one end to another. Quote Link to comment Share on other sites More sharing options...
WRXR255 Posted April 23 Report Share Posted April 23 1 minute ago, Sshannon said: So it really changes 5 kHz on fast and 1khz on slow, right? That probably takes forever to sweep from one end to another. Yeah, but I did find the manual online so I hope its settable. Its a funky radio for sure. Those tiny buttons, Arr! SteveShannon 1 Quote Link to comment Share on other sites More sharing options...
SteveShannon Posted April 23 Report Share Posted April 23 3 minutes ago, WRXR255 said: Yeah, but I did find the manual online so I hope its settable. Its a funky radio for sure. Those tiny buttons, Arr! Hopefully that STEP button will help. WRXR255 1 Quote Link to comment Share on other sites More sharing options...
Gnarlykaw Posted April 23 Author Report Share Posted April 23 This gives me a better understanding now. I'm not doing much in VFO as of yet, so this wont have any bearing then.... BUT ill leave it at 12.5 for now. Thanks all. SteveShannon 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.