Frequency Question

[WSBQ643]

I am putting a repeater that has other repeaters close by. One transmits on 461mhz and the othe other on 463mhz. 
I intend to use grms 462.725 TX and 467.725 RX. Should I have any problems with this? The antennas are not that close to each other

[quarterwave]

If everyone is running good equipment, it should be fine. 

I've been in tight commercial sites where there were 5-6 UHF repeaters within 2MHz of each other. And VHF to contend with. 

If the filtering is good, you're ok. 

[kidphc]

Yup like 1/4 wave said.

You should be fine.

Sent from my SM-S901U using Tapatalk

[kidphc]

I am putting a repeater that has other repeaters close by. One transmits on 461mhz and the othe other on 463mhz. 
I intend to use grms 462.725 TX and 467.725 RX. Should I have any problems with this? The antennas are not that close to each other

What kinda of distance are you talking about?

Sent from my SM-S901U using Tapatalk

[WSBQ643]

The other antennas are mounted vertically about 10 feet above mine and above each other

[WRYZ926]

We run our 2m, 70cm and GMRS repeaters on a 900 foot tall broadcast radio tower. There are also other radio services on the tower too. Properly tunes duplexers will keep interference at bay.

[WSBQ643]

I appreciate all the help. I will go forward with this and see how it goes. 

 

[nokones]

Just don't use a cheap Chinese junk duplexer. Use a quality duplexer like EMR Corp. Celwave, Sinclair, Motorola, and  Telewave.