Jump to content
  • 0

Can BTECH UV-25x2 run on a simple power adapter?


WRXR374

Question

5 answers to this question

Recommended Posts

  • 0

What do you mean by “a simple power adapter?”

If you’re talking about a wall wart, probably not. As @wayoverthere said you need to understand the current requirements and the voltage needed. Most mobile radios prefer 13.8 volts of clean DC. Wall warts are not always designed to provide clean DC. Also, a 25 watt radio, again as @wayoverthere said, probably needs 5 amps of DC current at 13.8v. 
A bad power supply can be a source of problems. 

Link to comment
Share on other sites

  • 0

Wall warts will only put out 12 volts which will cut back on the radio's power output. Plus most wall warts are very noisy as far as RFI and EFI goes.

6 hours ago, WRXR374 said:

and use the 25 somewhere else, hopefully without a $100 power supply.

Where do you plan on using the 25 watt radio at?

If you plan on using it in your vehicle then it can be powered by a the cigarette lighter/accessory outlet. Though connecting the positive wire to the battery and negative wire to a good chassis ground is the preferred method. Or as mentioned , you can run it from a battery or portable power station. 

Link to comment
Share on other sites

  • 0

I have a UV25x2.  it has the 12v car plug.  When not used in the car,  I use a cheap AC to DC  power converter and it seems to work ok.  I've even used my 300 watt portable battery station sometimes when I'm outside.   I think a more expensive proper power supply is better but I'm saving up for one in the future.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Answer this question...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Guidelines.