chirp

[WRWQ613]

I  programed the BTech-50v2 radio with chirp and the offset on the radio is not staying programmed from the software when I upload it to the radio am I doing something wrong ???

[Socalgmrs]

How do you know they are not saving?   Have you tried activating a repeater?  

[CoffeeTime]

Disregard. Misread Post.

[BoxCar]

5 minutes ago, WRWQ613 said:

I  programed the BTech-50v2 radio with chirp and the offset on the radio is not staying programmed from the software when I upload it to the radio am I doing something wrong ???

Post which channels you are programming and we can then dianose the problem. You may be trying to set a simplex only channel to repeater use and theradio's firmwre is blocking you.

[WRWQ613]

4 minutes ago, BoxCar said:

Post which channels you are programming and we can then dianose the problem. You may be trying to set a simplex only channel to repeater use and theradio's firmwre is blocking you.

 

[WRWQ613]

[BoxCar]

Everything looks right to me but, I don't have one of these radios so I'm not aware of any channel restrictions. l

[SteveShannon]

Program the Dayton tones into channel 23 and the Tipp DTCS code into channel 26 and see if it works. 

[tcp2525]

Are you saving the file after editing it? You might try saving your edited files prior to uploading to the radio. 

[WRWQ613]

On 5/5/2025 at 7:42 AM, SteveShannon said:

Program the Dayton tones into channel 23 and the Tipp DTCS code into channel 26 and see if it works. 

Ok thanks I will try that

[WRWQ613]

On 5/5/2025 at 8:07 AM, tcp2525 said:

Are you saving the file after editing it? You might try saving your edited files prior to uploading to the radio. 

I’ll try to do