Jump to content
  • 0

SWR testing


Sean WRMH985

Question

I tried searching on the forum and got an error because the search term was not four characters long....?

 

Are all SWR meters measuring the same thing in the same way? I have one that I have used on my CB and wondering if I can use it for GMRS testing once I install my setup.  Are they specific to each band and is the technique any different?

 

Thanks for the help!

Link to comment
Share on other sites

13 answers to this question

Recommended Posts

  • 0

They work the same. One just has the bridge setup for hf or vhf/uhf.

 

You can sometimes us a 11m cb swr meter for 10m. Really depends if it was designed for that range. A hf swr meter usually has no problem with 11m cb. Since most hf swr meters go up to at least 10m sometimes 6m.

 

You get what you pay for.

 

Sent from my SM-G975U using Tapatalk

Link to comment
Share on other sites

  • 0

They work the same. One just has the bridge setup for hf or vhf/uhf.

 

You can sometimes us a 11m cb swr meter for 10m. Really depends if it was designed for that range. A hf swr meter usually has no problem with 11m cb. Since most hf swr meters go up to at least 10m sometimes 6m.

 

You get what you pay for.

 

Sent from my SM-G975U using Tapatalk

 

:blink:  :wacko:  :huh:  :huh:   I don't understand the "11m cb" and "10m/6m" references.  I'm new to the GMRS world and other than setup, swr meter testing and some playing with CB, my practical knowledge is fairly limited.  I just picked up the Technician ham book from AARL but have not read it yet.  Assuming some of what you are referencing is in there?  Can you give me the 1000ft level of what you are talking about?

 

Thanks,

Link to comment
Share on other sites

  • 0

:blink: :wacko: :huh: :huh: I don't understand the "11m cb" and "10m/6m" references. I'm new to the GMRS world and other than setup, swr meter testing and some playing with CB, my practical knowledge is fairly limited. I just picked up the Technician ham book from AARL but have not read it yet. Assuming some of what you are referencing is in there? Can you give me the 1000ft level of what you are talking about?

 

Thanks,

He was adding you might be able to use your CB SWR meter for some HF ham radio equipment, and that the principal of how they all work is the same.

 

My answer stands though. You cannot use your current CB SWR meter for GMRS.

Link to comment
Share on other sites

  • 0

I have this one:

 

https://www.amazon.com/dp/B075H8FDDR/ref=cm_sw_r_cp_apa_glt_fabc_094Z4EYM185PWC0QPRFA

 

But maybe wish I would have bought this one:

 

https://www.amazon.com/dp/B01D86IKIQ/ref=cm_sw_r_cp_apa_glt_fabc_K51F3F82X8Y5HDAQEA7H?_encoding=UTF8&psc=1

 

There are many many other examples. There's a thread on this board somewhere where people are trying to figure out the best reasonably priced one. I'm still watching that waiting for a consensus.

Link to comment
Share on other sites

  • 0

I have this one:

 

https://www.amazon.com/dp/B075H8FDDR/ref=cm_sw_r_cp_apa_glt_fabc_094Z4EYM185PWC0QPRFA

 

But maybe wish I would have bought this one:

 

https://www.amazon.com/dp/B01D86IKIQ/ref=cm_sw_r_cp_apa_glt_fabc_K51F3F82X8Y5HDAQEA7H?_encoding=UTF8&psc=1

 

There are many many other examples. There's a thread on this board somewhere where people are trying to figure out the best reasonably priced one. I'm still watching that waiting for a consensus.

You get close to a nanovna in price. Two different functions. For tuning I prefer the Nano Vna.

 

I just ordered an rs70 for the cb. For real-time monitoring. However, I wanted as a on the fly reference. The rs50 is the vhf/uhf version.

 

If it weren't a mobile install I would of done a swing needle.

 

Sent from my SM-G975U using Tapatalk

Link to comment
Share on other sites

  • 0

The nano vna looks like something I don't want to mess with, regardless of price. I have a feeling OP was looking more towards the simpler end of the spectrum as well.

Nano vna is easy peezy. Not a turn on and good to go device. But close.

 

Buy it. Buy it... only if you are constantly tweeking or building antennas. The other swr meters you need to provide an input. Aka key up.

Link to comment
Share on other sites

  • 0

Buy it. Buy it... only if you are constantly tweeking or building antennas. The other swr meters you need to provide an input. Aka key up.

I think you just gave the exact reason most people aren't interested. They are not building antennas and are only interested in setting up their antenna on their new radio. Turn it on and go style.

 

I get that it's much more capable and feature rich for about the same price. Like I said though, for my needs anyways, I don't want to mess with that, regardless of the price. I'm sure it works great for your needs though. Sounds like you really like it.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Answer this question...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Guidelines.