Jump to content

does gmrs, specifically the wouxun 1000g need swr calibration like with cb?


tap

Recommended Posts

As Steve said, no but, it is always good to check the VSWRs on a new setup just to make sure you're not reflecting a lot of power back into the radio by having a bad connector of a defective coax cable. It does happen and a lot of reflected power will affect the power output and you will have a poor performing antenna system regardless if the antenna is properly tuned.

Link to comment
Share on other sites

 

I agree with the comments above.  No adjustments in the radio.  The nl-770g antenna is a pre-tuned antenna, that does not require tuning.

 

I also agree that it's good to check your SWR anyway.  The reasons Kenny mentioned are all good, but the location of the antenna also impacts your SWR.  If your SWR is high, you may want to move the antenna to a different location.  Cutting a pre-tune antenna and changing its resonant frequency is typically not a good idea.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Guidelines.