dmcpher326 Posted February 5 Report Share Posted February 5 this is weird or just me. Went to chnl 30, freq 462.7250...put in NO offset, NO DCS, NO R/T-CTCSS but the radio added the + offset and I can't get rid of it. Does this chnl/freq automatically ad the offset? If I switch to VFO, it isn't there, just under chnl mode....Radio is a UV-5G plus... Ideas? Thanks David Quote Link to comment Share on other sites More sharing options...
Socalgmrs Posted February 5 Report Share Posted February 5 It’s a gmrs radio. Anything after 22 will have offsets pre programmed for repeater use. 467.xxx is for accessing repeaters not for simplex. A 5g (gmrs radio) will not transmit in Vfo mode. WRUU653 and OffRoaderX 2 Quote Link to comment Share on other sites More sharing options...
OffRoaderX Posted February 5 Report Share Posted February 5 48 minutes ago, dmcpher326 said: Ideas? You didnt let us know what kind of radio it is, but just like @WRXP381 said, if its a GMRS radio, it is working exactly as designed and doing exactly what the user-manual says it will do. Quote Link to comment Share on other sites More sharing options...
SteveShannon Posted February 5 Report Share Posted February 5 1 hour ago, dmcpher326 said: this is weird or just me. Went to chnl 30, freq 462.7250...put in NO offset, NO DCS, NO R/T-CTCSS but the radio added the + offset and I can't get rid of it. Does this chnl/freq automatically ad the offset? If I switch to VFO, it isn't there, just under chnl mode....Radio is a UV-5G plus... Ideas? Thanks David If you want to transmit and receive on the same frequency use one of the simplex frequencies. Channels 15-22 receive on the same frequencies as repeater channels 23-30, BUT there is no offset. So, rather than selecting channel 30, use channel 22. It transmits and receives on 462.725 MHz WRUU653 and AdmiralCochrane 2 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.