All Activity
- Past hour
-
marcspaz reacted to a post in a topic: New CB. First Impressions
-
WSAY672 reacted to an answer to a question: MXT115 Repeater mode
-
With my K40 on my Pickup I think I am seeing between 3.4 and 3.7 with my Cobra 29 LTD Nightwatch depending on the selected channel, and my Firestik II antenna on my Jeep with my Cobra 19 DX III is seeing about 2.8 to 3.1 depending on the selected channel. The power levels were checked with the engine running. I'm still waiting to come across someone with a FM CB Radio so I can see how FM 29 LTD performs.
-
As well as using the link tone on Shaw Butte, which will open the link to Towers 600, Diamond Point 575, and a couple others. Also, getting in with SWCRS gets access to Pinal 675, which has amazing coverage here as well. I haven't heard much off the Lemmon 650, but there's also the webhiway_tucson repeater that has a massive coverage area.
-
And Shaw Butte. If you're a member of the Arizona GMRS Repeater Club, you would have access to the White Tanks Repeater which is linked to the Scottsdale, East Mesa, and Flagstaff repeaters.
-
It's just 1 dB, not significant and you won't know the difference in the operating distance unless you buy your cable from Amazon.
-
I think LMR600 has lower loses, a bit larger than LMR400, and I think it's not much more expensive either. The loss at 450MHz for LMR400 is 2.7db/100 feet. The loss at 450MHz for LMR600 is 1.7db/100 feet. For somebody who needs to run between 50 to 100 feed of coax stepping up to LMR600 would makes sense. The chart frequency of 450MHz is close enough to GMRS at 462/467 MHz the extra loss at the slightly higher frequency isn't that significant. For 50 feet of LMR400 at 450 MHz the power loss would be about 27%. For 50 feet of LMR600 at 450 MHz the power loss would be about 18%.
-
adnjacob reacted to a post in a topic: Why no UHF NOAA channels?
-
WSBT375 joined the community
-
This is true.
-
I thought that my Kenwood TK880-1 would be compliant on the 462 MHz Interstitial channels on low power but my recertified Bird 43 says it puts out a tad over 6 watts. I remember that my POS MFJ 849 said 4.7 watts last year that is why I decided to check this morning to see what the Bird would said. As for operating on the 462 MHz Interstitial Channels, you can operate wideband and narrowband, its your discretion. It's not just narrowband only, as per Section/Rule Part 95.1771(a) The Kenwood and Motorola portables and mobiles would be your best bet in order to be compliant with Part 95, Subparts A and E, and have the ability to program 70cm freqs. You will need to find the "R" model radio in the earlier models and the "Q" model radios for the later models in order to have the operating band range for programming the 70cm and GMRS freqs.
- Today
-
adnjacob reacted to a post in a topic: Is 50 watts a waste?
-
WRXB215 reacted to an answer to a question: Building a Portable Box for MXT500
-
WSBV457 joined the community
-
At a reasonable cost. There is better cable, various types of "hard line", but gets expensive real fast.
-
kidphc reacted to an answer to a question: Magnetic Antenna Mounts and Paint Damage
-
Lscott reacted to a post in a topic: Is 50 watts a waste?
-
WRZX444 reacted to a post in a topic: Is Radioddity DB-20G 20 watt mobile radio good?
-
Antenna issue (suspected)- receive is excellent, transmission is lacking.
nokones replied to dwmitchell61's question in Technical Discussion
A friend con me in going to the HAM thing at DeVry University with him this Saturday and if you or your friend is going to this HAM thing I can bring the 269D with me and give to you or him. Let me know if that will work. -
WRZX444 reacted to a post in a topic: Is Radioddity DB-20G 20 watt mobile radio good?
-
Use a handheld connected to a base antenna in the 2nd story window. 5W gets to the 20 mile repeater just fine. Once I tried the low power setting, which is 1/2W. It still got through but they said it was a bit scratchy.
-
Magnetic Antenna Mounts and Paint Damage
gortex2 replied to Over2U's question in Technical Discussion
Just drill a hole and dont worry about that mag mount. -
When installing a GMRS base antenna...
Jack442 replied to Jack442's question in Technical Discussion
Thank you @Sshannon That is exactly the info I need. -
Sshannon reacted to a post in a topic: Wouxun Q10G - no CB reception?
-
Norequest joined the community
-
WSBW595 changed their profile photo
-
Magnetic Antenna Mounts and Paint Damage
WRXP381 replied to Over2U's question in Technical Discussion
I’ve never had this problem however clear vinyl wrap would work best. -
WSBA739 joined the community
-
WSBZ694 joined the community
-
WRFM797 joined the community
-
I'm jumping up and down giggling right now after opening your Pcalifornia.kmz file in google earth. My god this is better than I expected, and color coded for open repeaters. How did you compile this data? Do you work for mygmrs? I like the idea of having a kmz file for each individual state, also having a kmz file is better too. I use a offline maps platform called osmand which is ridiculously powerful and incredibly feature and rich, and nearly every single option, map display, etc is customizable. And it's all offline. With this KMZ I can import it into that so while I am navigating I'll be able to see the repeaters nearby visually, something you cannot do in something like google maps or waze. I'm just awestruck because this has absolutely exceeded what I thought of being able to do. If there was a (free) or "pro" paid feature in the mygmrs app or website where you can download the kmz file database by state, and it's updated and recompiled the same way the app and map feature is, it's something I'd pay for, and maybe a few others as well. Very interesting. Thank you for your insight! Wow this thread has blown up a little, I'm glad this is getting some attention and stirring up some ideas among all of us Thank you everyone!
-
You could save some money and use a lower powered radio. Wont need as big of a battery or a higher wattage solar panel. For instance my recent simplex repeater build has been running for a few weeks now on a measly 6ah battery and 10 watt solar panel. However my radio only draws 1.5 amps at 10 watts while transmitting, and .3 amps when idle. Here is the link if you want to see what i used and how it turned out. Might help give you some ideas.
-
WRYQ715 joined the community
-
WRUZ229 started following Wouxan KG-1000g plus faceplate data cable
-
I can’t answer your question. However, it took watching several YouTube videos for me to get my head into the right space/perspective to successfully use the channel wizard. Once I arrived, it was easy. Hang in there. YOU CAN DO IT!
-
Helical/Corkscrew in Mobile Antennas: What’s the high-level science explanation?
CALO50 replied to CALO50's question in Technical Discussion
Sounds reasonable. Thank you for not sending us into a differential equation coma. -
Wouxan KG-1000g plus faceplate data cable
CALO50 replied to Gnarlykaw's question in Technical Discussion
As noted by WRYZ926, the sequence is a bit difference. Definitely use a standard cable tester and couple the OEM cable to your new cable build for testing. The indicators should light up like a normal cable. FWIW, the extension I made took 6 tries before it was of sufficient quality. Hang in there. YOU CAN DO IT! -
What is the principle behind the "ghost" antenna?
Lscott replied to WRWE744's question in Technical Discussion
I’ll have to check that one out. Every once in a while I get asked about it. -
Wouxan KG-1000g plus faceplate data cable
WRYZ926 replied to Gnarlykaw's question in Technical Discussion
The Wouxun KG-1000G cable is not a standard straight through or crossover cable. Pins 5 and 7 are crossed. Here is the pinout for the KG-1000G cable 1 - 1 2 - 2 3 - 3 4 - 4 5 - 7 6 - 6 7 - 5 8 - 8 I will suggest getting a cable tester for testing. Here is one on Amazon that will test 6 wire cables with RJ12 connectors and 8 wire cables with RJ45 connectors. RJ45 Network Cable Tester for Lan Phone RJ45/RJ11/RJ12/CAT5/CAT6/CAT7 UTP Wire Test Tool -
In the meantime there's also the Towers 600. I've gotten responses out of it in my house in San Tan Valley with my Baofeng UV-9G. Both with stock and Nagoya 771-G antennas.
-
Magnetic Antenna Mounts and Paint Damage
nokones replied to Over2U's question in Technical Discussion
XPEL Clear Vinyl Paint Protection Film -
I had to do that when I did a minor mod to add a "tiger tale"