My cheapskate attic antenna

[Paul357]

Hello,

I set up a quick and dirty base station antenna in my attic. It's a Midland MXTA26 antenna fed by a MXTA24 NMO cable. I put a 14" aluminum pizza pan under it as a ground plane. I have about $55 into this setup.

The radio is a Wouxun KGSX20G+ fed by a Pyramid 12Amp power supply. So far I think it's working well. I guess I need some adapters to test this setup with my Surecom meter but no smoke yet.

Any tips or critiques appreciated. I wanted to test the attic concept before committing to more expensive hardware.

 

 

[WSEN940]

I'd say that if it gets you connected to who you want to connect to...then it's a great setup. I've been using the same antenna with a metal sheet in my garage, works great for what I need it for. If I needed to get out much further, I'd do something more elaborate as well.

My main antenna is an Ed Fong J-Pole that's also up in my attic. We have a 'lot' of wind and weather here and I put it there while I figure out an external, and permanent, solution.

 

[Socalgmrs]

Looks good.  Personally I would have spent less on a better radio and more on an antenna but if it works then it works.  
 

antenna and coax is light years more important then the radio. 

[SteveShannon]

12 hours ago, Paul357 said:

Hello,

I set up a quick and dirty base station antenna in my attic. It's a Midland MXTA26 antenna fed by a MXTA24 NMO cable. I put a 14" aluminum pizza pan under it as a ground plane. I have about $55 into this setup.

The radio is a Wouxun KGSX20G+ fed by a Pyramid 12Amp power supply. So far I think it's working well. I guess I need some adapters to test this setup with my Surecom meter but no smoke yet.

Any tips or critiques appreciated. I wanted to test the attic concept before committing to more expensive hardware.

 

 

Nice. If it works there’s really no reason to do anything else.  

[tcp2525]

12 hours ago, Paul357 said:

Hello,

I set up a quick and dirty base station antenna in my attic. It's a Midland MXTA26 antenna fed by a MXTA24 NMO cable. I put a 14" aluminum pizza pan under it as a ground plane. I have about $55 into this setup.

The radio is a Wouxun KGSX20G+ fed by a Pyramid 12Amp power supply. So far I think it's working well. I guess I need some adapters to test this setup with my Surecom meter but no smoke yet.

Any tips or critiques appreciated. I wanted to test the attic concept before committing to more expensive hardware.

 

 

Welcome to the forum. That is an excellent setup for "quick and dirty" that should perform well for you. These are perfect indoor antennas and should withstand the harsh temperature changes found in the attic.

[nokones]

12 hours ago, Paul357 said:

Hello,

I set up a quick and dirty base station antenna in my attic. It's a Midland MXTA26 antenna fed by a MXTA24 NMO cable. I put a 14" aluminum pizza pan under it as a ground plane. I have about $55 into this setup.

The radio is a Wouxun KGSX20G+ fed by a Pyramid 12Amp power supply. So far I think it's working well. I guess I need some adapters to test this setup with my Surecom meter but no smoke yet.

Any tips or critiques appreciated. I wanted to test the attic concept before committing to more expensive hardware.

 

 

That kinda looks like my attic for one of my three antennae. By any chance do you have a Del Webb constructed home?

I am using a Laird non-ground plane mobile antenna.

[WRUE951]

one of my friends living in a Del Webb community hung a J=Pole Antenna within a tree.. Worked good for him..  

[WSHH887]

Speaking of Del Webb, I was always impressed with the commercial buildings his company built. They put brass plaques on them with things like the architect and project manager's names. They took pride in what they built. Sadly today most builders put up buildings that barely meet code and begin to fail as soon as the last nail is driven.