Jump to content
  • 0

Radioddity DB25-G Wont Power Up


WRVB372
 Share

Question

I just recently purchased a Radioddity DB25-G GMRS radio. When I first put this radio in my truck it powered up and worked fine. after a minute the radio flickered but stayed on. I checked to make sure all connections were secure found everything as it should be. As I went to hook up the external specker the radio shut down and would not restart. Fuse is not blowen and all connections are secure. The display shows very faintly. Dose anyone have any ideas what the problem could be?  

 

Link to comment
Share on other sites

4 answers to this question

Recommended Posts

  • 0
52 minutes ago, WRVB372 said:

I just recently purchased a Radioddity DB25-G GMRS radio. When I first put this radio in my truck it powered up and worked fine. after a minute the radio flickered but stayed on. I checked to make sure all connections were secure found everything as it should be. As I went to hook up the external specker the radio shut down and would not restart. Fuse is not blowen and all connections are secure. The display shows very faintly. Dose anyone have any ideas what the problem could be?  

 

First thing I would check is the incoming voltage; see if it sags when you power up.

Link to comment
Share on other sites

  • 0

Hi I'm WRUH751 and I have the same problem, y

the radio was ON  but not in use,  next second shot off , I change the fuses but no luck.

I hope you resolve your problem, share solutions if you find any please.

Thank you.

 

 

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Answer this question...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Guidelines.