Guest Posted July 30, 2023 Report Share Posted July 30, 2023 11 minutes ago, RayP said: Well, for one thing, ham is not an acronym. Don't worry - - I guess the O.P. wanted to make a P.O.I.N.T as he is known to appreciate S.A.D. HAMs Quote Link to comment Share on other sites More sharing options...
WRUU653 Posted July 30, 2023 Report Share Posted July 30, 2023 1 hour ago, RayP said: Well, for one thing, ham is not an acronym. Oh he knows… I think he just likes to see who will jump to correct him. Raybestos and SteveShannon 2 Quote Link to comment Share on other sites More sharing options...
OffRoaderX Posted July 30, 2023 Author Report Share Posted July 30, 2023 1 hour ago, RayP said: Well, for one thing, ham is not an acronym. Obviously it is an acronym because "ham" would not make any sense. H.A.M. makes more sense to anyone with a good grasp of talking english good. SOBX, WRXB215, SteveShannon and 2 others 5 Quote Link to comment Share on other sites More sharing options...
SteveShannon Posted July 30, 2023 Report Share Posted July 30, 2023 Until fairly recently, one legend about the origin of the word "ham" as related to amateur radio operators, did admit the possibility of an acronym, made up of the first initials of three amateur operators who had one of the first call signs. It has since been debunked, but honestly, the folks who get upset over things like this should just take a deep breath. Another suggests that the letters came from Hertz, Armstrong, and Marconi. There is an entire article about the etymology of "ham" in Wikipedia https://en.wikipedia.org/wiki/Etymology_of_ham_radio#:~:text="A little station called HAM",-This widely circulated&text=An amateur station that Hyman,represent all of amateur radio. An amateur station that Hyman supposedly shared with Bob Almy and Reggie Murray, which was said to be using the self-assigned call sign HAM (short for Hyman-Almy-Murray), thus came to represent all of amateur radio. Raybestos and WRUU653 2 Quote Link to comment Share on other sites More sharing options...
back4more70 Posted July 30, 2023 Report Share Posted July 30, 2023 2 hours ago, WRXE944 said: Ah, the McDonnell-Douglas NOTAR-ubicon. Pretty fancy engineering there. Quote Link to comment Share on other sites More sharing options...
mrobisr Posted August 5, 2023 Report Share Posted August 5, 2023 On 5/14/2023 at 6:16 PM, OffRoaderX said: Just curious what tips all the licensed H.A.M. operators would give to someone thinking about getting their H.A.M. license. I just took the tech and general test this morning and will say that if you have basic mechanical and electrical comprehension and are able to critically look at the question and possible answers then the tech is a short study. The general was more intense by every way, but I studied for two nights and passed easily. I like the flash cards (out of date) on hamexam.org/flash_cards/18-Technician and the current test questions on eham.net/exams/index, will use the same technique in two months when the test is local again and take the extra. SteveShannon 1 Quote Link to comment Share on other sites More sharing options...
WRQC527 Posted August 6, 2023 Report Share Posted August 6, 2023 On 7/30/2023 at 11:18 AM, RayP said: Well, for one thing, ham is not an acronym. https://tenor.com/view/muggy-fishing-gif-11290854 SteveShannon 1 Quote Link to comment Share on other sites More sharing options...
JoCoBrian Posted August 25, 2023 Report Share Posted August 25, 2023 On 6/30/2023 at 4:33 PM, back4more70 said: There isn't one above Amateur Extra...? Master Class...but it's top secret. You have to be invited by two other Master Class ticket holders and then approved by the Master Class Board of Scrutiny. It can take longer to get approved than the FCC takes processing licenses. Quote Link to comment Share on other sites More sharing options...
Guest Posted August 25, 2023 Report Share Posted August 25, 2023 1 hour ago, JoCoBrian said: [...] It can take longer to get approved than the FCC takes processing licenses. That would be about three days then ?!? Sorry, but the processing times have really improved - The exams I submit to W5YI on a weekend have callsigns issued by Wednesday morning (that is VEC and FCC processing time) Quote Link to comment Share on other sites More sharing options...
SteveShannon Posted August 25, 2023 Report Share Posted August 25, 2023 1 hour ago, WRXD372 said: That would be about three days then ?!? Sorry, but the processing times have really improved - The exams I submit to W5YI on a weekend have callsigns issued by Wednesday morning (that is VEC and FCC processing time) Our VEC electronically submitted my results the night I tested. The next day I had my license. WRUU653 1 Quote Link to comment Share on other sites More sharing options...
back4more70 Posted August 25, 2023 Report Share Posted August 25, 2023 13 hours ago, JoCoBrian said: Master Class...but it's top secret. You have to be invited by two other Master Class ticket holders and then approved by the Master Class Board of Scrutiny. It can take longer to get approved than the FCC takes processing licenses. I've seen those guys in front of the grocery stores, handing out flowers and soliciting donations. Odd hair styles though. JoCoBrian 1 Quote Link to comment Share on other sites More sharing options...
Guest Posted August 25, 2023 Report Share Posted August 25, 2023 6 minutes ago, back4more70 said: I've seen those guys in front of the grocery stores, handing out flowers and soliciting donations. Odd hair styles though. Are those the guys whose warning vests do not have reflective stripes and look like bedsheets ?!? Quote Link to comment Share on other sites More sharing options...
WRXA276 Posted October 7, 2023 Report Share Posted October 7, 2023 You can find practice material and practice exams for all three classes of amateur (ham) radio license at www.qrz.com . When you get to the homepage, click on "Resources" and you will find what you need. A good book for learning the radio theory is the ARRL Handbook, as the chapters in the beginning of this book will teach you how things work. You can order it from www.arrl.org .The W6SAI Radio Handbook by Bill Orr is also a gold mine of information; however, it may be out of print but still available on Amazon and the like. If you are in the Wilkes-Barre, PA area, the Murgas Amateur Radio Club offers testing sessions before the monthly meeting on the first Wednesday of each month. Contact murgasarc.org to register. Otherwise, check your local radio clubs for testing information. Testing sessions are commonly offered at hamfests, events where people sell used amateur radio (and, often, computer) equipment and just shoot the breeze. If you have an active GMRS repeater in your area, don't be afraid to ask about amateur radio activity. Many of us are licensed in both services. In my area, the GMRS repeater sounds a lot like our 2 meter ham repeaters. Phil K2PG (ham for 55 years) and WRXA276 (recently licensed in GMRS) Quote Link to comment Share on other sites More sharing options...
OffRoaderX Posted October 7, 2023 Author Report Share Posted October 7, 2023 3 minutes ago, WRXA276 said: Phil K2PG (ham for 55 years) Thank you. I was skeptical until I saw how long you've been a H.A.M., but now I am very impressed. Quote Link to comment Share on other sites More sharing options...
WRTJ886 Posted October 7, 2023 Report Share Posted October 7, 2023 12 hours ago, OffRoaderX said: Thank you. I was skeptical until I saw how long you've been a H.A.M., but now I am very impressed. Man, you're kind of a dick online. You were one of the people I would watch regularly when trying to figure out this whole GMRS thing. Your schtick is funny on YouTube but something is getting lost in translation via text. WRXN668, Summit1 and WRUU653 1 1 1 Quote Link to comment Share on other sites More sharing options...
OffRoaderX Posted October 7, 2023 Author Report Share Posted October 7, 2023 1 hour ago, WRTJ886 said: Man, you're kind of a dick online I'm a dick in person too, so its ok. WRXN668, n2877, back4more70 and 1 other 2 2 Quote Link to comment Share on other sites More sharing options...
SteveShannon Posted October 7, 2023 Report Share Posted October 7, 2023 2 hours ago, OffRoaderX said: I'm a dick in person too, so its ok. Affiliate link below WRXN668, n2877, marcspaz and 1 other 4 Quote Link to comment Share on other sites More sharing options...
GreggInFL Posted November 2, 2023 Report Share Posted November 2, 2023 Question (which may have been addressed in the previous pages, but I'm too lazy to check): Must one take the tech exam first? What if one wants to go straight to the general? Is that a no-can-do, or a sure-why-not? Okay, three questions total. Quote Link to comment Share on other sites More sharing options...
WRYS709 Posted November 2, 2023 Report Share Posted November 2, 2023 … Quote Link to comment Share on other sites More sharing options...
WRXN668 Posted November 2, 2023 Report Share Posted November 2, 2023 7 minutes ago, GreggInFL said: Question (which may have been addressed in the previous pages, but I'm too lazy to check): Must one take the tech exam first? What if one wants to go straight to the general? Is that a no-can-do, or a sure-why-not? Okay, three questions total. I can't answer definitively or through my own experience, but many that have fairly recently taken exams described taking a lower-level exam first, and after passing being offered to take a higher level exam. Like, they took Technician, and then sat for General even though they hadn't signed up specifically to do so because the proctors offered it. Someone sitting for General described then sitting for Extra because it was offered. My own Technician license was tested-for and received more than twenty years ago, I don't recall that sort of thing being the case back then, but then again this was only just after the morse code 'Tech Plus' was dropped, and there might still have been a morse code requirement for General, and if I told the test proctors that then they probably wouldn't have even offered me a General exam. Given that this was back before most people even had Internet access and those few who did had dialup, there might have been more interest generally in the hobby to where there wasn't yet a desire to lower the barriers more than the morse code situation for the entry-level license. Passing Technician back then was almost trivially easy. I expect that it's no worse today, and frankly that many GMRS users would actually be happier as hams with more bands, spectrum within bands, and power available to them. Quote Link to comment Share on other sites More sharing options...
SteveShannon Posted November 2, 2023 Report Share Posted November 2, 2023 18 minutes ago, WRXN668 said: I can't answer definitively or through my own experience, but many that have fairly recently taken exams described taking a lower-level exam first, and after passing being offered to take a higher level exam. Like, they took Technician, and then sat for General even though they hadn't signed up specifically to do so because the proctors offered it. Someone sitting for General described then sitting for Extra because it was offered. My own Technician license was tested-for and received more than twenty years ago, I don't recall that sort of thing being the case back then, but then again this was only just after the morse code 'Tech Plus' was dropped, and there might still have been a morse code requirement for General, and if I told the test proctors that then they probably wouldn't have even offered me a General exam. Given that this was back before most people even had Internet access and those few who did had dialup, there might have been more interest generally in the hobby to where there wasn't yet a desire to lower the barriers more than the morse code situation for the entry-level license. Passing Technician back then was almost trivially easy. I expect that it's no worse today, and frankly that many GMRS users would actually be happier as hams with more bands, spectrum within bands, and power available to them. Yes, a person with a decent understanding of electronics and who studies to understand could walk in with no license and walk out with an Amateur Extra license. Quote Link to comment Share on other sites More sharing options...
back4more70 Posted November 2, 2023 Report Share Posted November 2, 2023 41 minutes ago, GreggInFL said: Question (which may have been addressed in the previous pages, but I'm too lazy to check): Must one take the tech exam first? What if one wants to go straight to the general? Is that a no-can-do, or a sure-why-not? Okay, three questions total. You take the technician exam first. If you pass, they offer the general exam right then and there. If you pass that, they offer the amateur extra exam right then and there. In theory, you could pass the whole thing in one sitting. AdmiralCochrane 1 Quote Link to comment Share on other sites More sharing options...
back4more70 Posted November 2, 2023 Report Share Posted November 2, 2023 On 10/7/2023 at 10:00 AM, OffRoaderX said: I'm a dick in person too, so its ok. I heard if you put on a bikini and wash his Jeep, he is slightly nicer. WRXN668, n2877 and Summit1 1 2 Quote Link to comment Share on other sites More sharing options...
SOBX Posted April 17 Report Share Posted April 17 On 5/14/2023 at 7:16 PM, OffRoaderX said: Just curious what tips all the licensed H.A.M. operators would give to someone thinking about getting their H.A.M. license. I'm Jewish. We don't get ham licenses. That's a sin. WRXN668 and WRQC527 2 Quote Link to comment Share on other sites More sharing options...
WRQC527 Posted April 17 Report Share Posted April 17 37 minutes ago, LariatAdvance said: I'm Jewish. We don't get ham licenses. That's a sin. There's a little-known FCC regulation concerning a kosher license. It's so little-known, in fact, that no one knows about it. SOBX 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.