Guest Posted July 10, 2023 Report Share Posted July 10, 2023 17 minutes ago, Radioguy7268 said: [...] Things have been dead over here on mygrms forums lately. Quote Link to comment Share on other sites More sharing options...
SteveShannon Posted July 10, 2023 Report Share Posted July 10, 2023 2 hours ago, DirtyCitizen said: Are the people transmitting in what sounds like morse code/or really slow APRS on gmrs breaking the law and exceeding their "Limitations"? Morse code station identification of a GMRS station is permitted by the regulations. That’s not the kind of “code” that the regulations prohibit. Codes used to conceal meaning are. WRUU653 1 Quote Link to comment Share on other sites More sharing options...
DirtyCitizen Posted July 10, 2023 Author Report Share Posted July 10, 2023 3 minutes ago, Sshannon said: Morse code station identification of a GMRS station is permitted by the regulations. That’s not the kind of “code” that the regulations prohibit. Codes used to conceal meaning are. thank you that answers my question, and is aprs ok? I'm 30miles S-E of DC on Pennsylvania AVE/MD rt.4 so is aprs acceptable for gmrs seems to be a lot of traffic on it as well as MURS? and stations in between. I have Patuxent River Naval Air station, Andrews AFB and a Nuclear power plant all within gmrs distance so I would assume it would piss someone off if it were.. but I had a few Ideas about using programs like rattler or other programs that aren't really hiding anything but they would take someone more than a simple radio to quickly read and reference. I'm studying a bit more before getting my technicians license just because of where I'm at it seems pretty easy to get myself in trouble if I don't know what I'm doing. test seems simple enough but I kinda screwed up and read the army manuals first now I'm in the process of figuring out what is and isn't acceptable on different bands... You do any hunting out there in Mt? Quote Link to comment Share on other sites More sharing options...
SteveShannon Posted July 10, 2023 Report Share Posted July 10, 2023 21 minutes ago, DirtyCitizen said: thank you that answers my question, and is aprs ok? I'm 30miles S-E of DC on Pennsylvania AVE/MD rt.4 so is aprs acceptable for gmrs seems to be a lot of traffic on it as well as MURS? and stations in between. I have Patuxent River Naval Air station, Andrews AFB and a Nuclear power plant all within gmrs distance so I would assume it would piss someone off if it were.. but I had a few Ideas about using programs like rattler or other programs that aren't really hiding anything but they would take someone more than a simple radio to quickly read and reference. I'm studying a bit more before getting my technicians license just because of where I'm at it seems pretty easy to get myself in trouble if I don't know what I'm doing. test seems simple enough but I kinda screwed up and read the army manuals first now I'm in the process of figuring out what is and isn't acceptable on different bands... You do any hunting out there in Mt? Although some GMRS radios do exchange location information with each other using digital data, APRS typically relies on digipeaters which are not part of GMRS. In fact, GMRS radios are not permitted to send digital or position data through repeaters. APRS is really more of an amateur radio thing. I used HamStudy and getting my licenses was a piece of cake. I haven’t hunted in years. I do enjoy shooting though and the scarier looking the gun is the better. Quote Link to comment Share on other sites More sharing options...
DirtyCitizen Posted July 10, 2023 Author Report Share Posted July 10, 2023 10 minutes ago, Sshannon said: Although some GMRS radios do exchange location information with each other using digital data, APRS typically relies on digipeaters which are not part of GMRS. In fact, GMRS radios are not permitted to send digital or position data through repeaters. APRS is really more of an amateur radio thing. I used HamStudy and getting my licenses was a piece of cake. I haven’t hunted in years. I do enjoy shooting though and the scarier looking the gun is the better. Yeah the politics in Maryland where I am now are pretty wild. My family still has a cabin in the Bull Mountains north of Billings. It'd be the perfect place for a ham tower. I hunted with my cousins quite a bit, only ever got deer, a ton of prairie dogs an unfortunately for our dog a porcupine. I lived out there till I was about 15 though.. looking back I'm not sure what my 10yo cousin or I(@13)would have done if we got an elk or bear while we were out there. Definitely miss it. My brothers and sister live out here and I haven't been able to visit since 2020 right before Covid. Things out here by DC and Baltimore are pretty on edge at the moment sure would love to move back. And all the guns in Maryland are pretty well neutered. with mag bans and HBAR reqs for any build most of what I have save a few useful pieces are antiqes, the rest stay out there and in W.Va. sorry for being a bit of an ass earlier btw. I'm hoping to get out there soon to spend some time with Family and maybe go waste some time hunting pronghorn. If I get my technicians license I might run across ya. and if you know any good places to sight in a new 6.5 Grendel build definitely let me know. I've only a 2-300yard stretch out there to work with, the Pine's gotten really thick from what I've seen. Quote Link to comment Share on other sites More sharing options...
SteveShannon Posted July 10, 2023 Report Share Posted July 10, 2023 No problem. I don’t really know of any long range shooting ranges, but I’m sure that they must have on in the Billings area. Try that HamStudy. You can either do it as an app or for free on the website. DirtyCitizen 1 Quote Link to comment Share on other sites More sharing options...
WRTU454 Posted July 12, 2023 Report Share Posted July 12, 2023 Pretty sure that you can speak another language. Does the FCC mandate US English? Not code or encryption, but another language not commonly used in the US will eliminate most eavesdroppers. A lot of work, of course if you don’t already happen to speak another language. Quote Link to comment Share on other sites More sharing options...
Guest Posted July 12, 2023 Report Share Posted July 12, 2023 Right On: 47 CFR 95.303 - https://www.ecfr.gov/current/title-47/section-95.303 "Plain language voice communications. Voice communications without codes or coded messages intended to provide a hidden meaning. Foreign languages and commonly known radio operating words and phrases, such as “ten four” and “roger,” not intended to provide a hidden meaning, are not considered codes or coded messages." Maybe we should call that the "google translate provision" of Part 95 ?!? Quote Link to comment Share on other sites More sharing options...
WRUU653 Posted July 12, 2023 Report Share Posted July 12, 2023 19 minutes ago, WRTU454 said: Does the FCC mandate US English? El ingles no es obligatorio SteveShannon 1 Quote Link to comment Share on other sites More sharing options...
Guest Posted July 12, 2023 Report Share Posted July 12, 2023 10 minutes ago, WRUU653 said: El ingles no es obligatorio Du weist schon das Deutsch die wahre Sprache der Liebe is und nicht Französisch ?!? -- no hidden meaning here ! Quote Link to comment Share on other sites More sharing options...
Radioguy7268 Posted July 12, 2023 Report Share Posted July 12, 2023 I've still got my Navajo codebook from Windtalkers. WRUU653 1 Quote Link to comment Share on other sites More sharing options...
SteveShannon Posted July 12, 2023 Report Share Posted July 12, 2023 29 minutes ago, WRXD372 said: Du weist schon das Deutsch die wahre Sprache der Liebe is und nicht Französisch ?!? -- no hidden meaning here ! Ich weiß dass Sie haben Norwegisch vergessen. Quote Link to comment Share on other sites More sharing options...
OffRoaderX Posted July 12, 2023 Report Share Posted July 12, 2023 Vergessen Sie nicht, Ihr Ovomaltine zu trinken! SteveShannon and WRUU653 2 Quote Link to comment Share on other sites More sharing options...
SteveShannon Posted July 12, 2023 Report Share Posted July 12, 2023 1 minute ago, OffRoaderX said: Vergessen Sie nicht, Ihr Ovomaltine zu trinken! Gute idee! Für mir schmecht es gut! WRUU653 1 Quote Link to comment Share on other sites More sharing options...
jsneezy Posted July 12, 2023 Report Share Posted July 12, 2023 Igpay Atinlay? WRXW945 1 Quote Link to comment Share on other sites More sharing options...
WRUU653 Posted July 12, 2023 Report Share Posted July 12, 2023 1 hour ago, WRXD372 said: Du weist schon das Deutsch die wahre Sprache der Liebe is und nicht Französisch ?!? -- no hidden meaning here ! Ich muss meinem Bruder sagen, als er heute in Deutschland ankam… 1 hour ago, Sshannon said: Ich weiß dass Sie haben Norwegisch vergessen och svenska också Mmmm Ovaltine SteveShannon 1 Quote Link to comment Share on other sites More sharing options...
SteveShannon Posted July 12, 2023 Report Share Posted July 12, 2023 1 hour ago, jsneezy said: Igpay Atinlay? Es-yay. I-ay eak-spay ig-pay Atin-lay! I gave part of a eulogy in pig Latin for my aunt Merle once. WRUU653 and jsneezy 2 Quote Link to comment Share on other sites More sharing options...
AdmiralCochrane Posted August 12, 2023 Report Share Posted August 12, 2023 On 7/10/2023 at 1:44 AM, DirtyCitizen said: Yeah the politics in Maryland where I am now are pretty wild. ... And all the guns in Maryland are pretty well neutered. with mag bans and HBAR reqs for any build most of what I have save a few useful pieces are antiqes, the rest stay out there and in W.Va. I agree MD gun laws are stupid, but not sure if your description or understanding of gun laws in MD is accurate. Since you travel out of state often, the mag restriction basically is nothing to you. You may bring them in from other states, you just cannot buy them in MD. The MD AR barrel profile restriction only applies to .223 & 5.56, other calibers can legally have any profile; if that much of a barrel profile difference neuters an AR for you, I'm not sure how you are able to carry a rifle that shoots 6.5 Grendel Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.