Wouxun KG-UV9D Plus unlock?

WSAA635 · January 19

Seems like all the radios with airband that I'm finding for sale are HAM radios. One that's caught my eye is the KG-UV9D Plus. From a video I watched it seems easy enough to expand the frequency into the GMRD bands using chirp. Legality aside, in a SHTF situation is this "fix" just this easy as it seems?

back4more70 · January 19

I am not familiar with that radio, but I own the KG-UV9D Mate, and I enabled GMRS via CHIRP. It seems like it would be pretty similar.

WSAA635 · January 19

Thanks for the fast response. I think the main difference with the MATE is the power output. If the MATE was offered in some other color than orange I might spend the extra $10 and get it but the standard Plus should work ok for my needs.

WRWE456 · January 19

Maybe this would be a better option for you. It's still a GMRS radio.

https://bettersaferadio.com/wouxun-kg-uv9gx-gmrs-two-way-radio-shtf-scanner/

WRUU653 · January 19

I have the KG-UV9PX and this also works in Chirp. That said I chose it because I have my ham. @WRWE456 has a good recommendation though if you just want to be able TX on GMRS. It's essentially the same radio but certified for GMRS.

WSAA635 · January 19

The 9Gx isn't listed on Amazon. I ordered the 9D Plus, it'll be here tomorrow so I'll see if I can expand the frequency to TX GMRS and I can program some airband and 800MHz for RX only. Thanks for the replies.

WRWE456 · January 19

Good luck! Let us know how it goes.

WSAA635 · January 21

Got my UV9D Plus today. Menus in CHIRP are a bit different for setting frequencies than in the YouTube video that I watched. I did manage to get GMRS/FRS programmed into the radio and it works. Just need to see if I can find a video that shows this radio's setting list in CHIRP Legacy to compare with what I've got it set at. Any pics that anyone can post would be helpful of their settings. Thanks.

WSAA635 · January 21

Still having trouble getting Airbands despite watching a couple three videos on YouTube on how to do it. I can program them in for the local Goodyear Airport but only 2 of the 4 show up and one isn't showing up as AM even though it's in the AM Band. I'll figure it out eventually but any help would also be awesome.

WRUU653 · January 21

@WSAA635 make sure you choose AM in the mode column in Chirp. You may want to select "Auto AM in the radio menu. Also I believe your radio will only receive AM in the top section of your radio, not the lower. I hope this helps.

WSAA635 · January 21

Yes to everything. I set the stations to AM, I had Auto AM set and I was working on the top section. I did a Factory Reset but I don't think it reset everything because my custom heading didn't reset.

I really need a pic of the Factory settings so I can reset all of that and go from there.

WSAA635 · January 22

I reset everything. Got my GMRS frequencies and the 3 DPS channels reinstalled and that all works. I didn't mess with anything much in settings except for turning of the voice and keyboard beep. I can't even input an Airband frequency from the front panel in freq. mode. They just don't take. A big reason why I got this radio is because it was suppose to do Airband. If ANYONE can show me the settings they're using to get Airband I'd really appreciate it.

WRUU653 · January 22

@WSAA635, can you screenshot your Chirp settings for us? Maybe it will show something. Are the frequencies you’re trying to put in within the radio’s ability? Also depending on where you are and what you’re listening to maybe there isn’t much to hear? When you try to front panel program are you in the top section? Sorry if some of this sounds obvious, it’s difficult to know what is going on so I’m throwing out all I can think of.
What antenna are you using? Is it a case of not being able to put the frequency in or it not receiving? It looks like you said you were able to program a couple.

Edited January 22 by WRUU653
Additional Questions

back4more70 · January 22

Perhaps airband can only be entered in one side and not the other? For example, on my KG-UV9D Mate, I can only pick up 1.25m in Area A and not Area B.

SteveShannon · January 22

I don’t have the radio, so maybe this doesn’t help, but I looked up the radio out of curiosity.

The frequencies advertised for this radio are as follows:

7-Band receive frequency range: 76-108 (FM Radio), 108-136 (AM), 136-180 (FM), 230-250 (FM), 350-400 (FM), 400-512 (FM), 700-823 (FM)

If that is a literal representation of coverage limits baked into the firmware, then it would appear that you can only tune to AM frequencies from 108-136, but above 136 the radio only does FM.

The airband extends from 108-137, so if the 108-136 MHz coverage listed above truly reflects firmware boundaries then you just can’t get there (136-137 MHz AM) from here.

WRUU653 · January 22

2 hours ago, back4more70 said:

Perhaps airband can only be entered in one side and not the other? For example, on my KG-UV9D Mate, I can only pick up 1.25m in Area A and not Area B.

Thank you, this was what I meant by top section but better said.

WSAA635 · January 22

Here are some screen shots. In the 150MHz I've had it with AM Modulation checked and as it is now, unchecked and it doesn't seem to make a difference.

WRUU653 · January 22

@WSAA635, this one sticks out to me. Try enabling this.

WRUU653 · January 22

okay I missed you statement at the top. That said I checked my radio KG-UV9PX (essentially the same radio) and this was enabled.

WRUU653 · January 22

Mine looks a little different at the top of configuration. Not sure if it's this radio or the Mac software. perhaps someone else with you exact set up can chime in. Amazon makes for easy returns and I think you would get good customer help from Buy two way radios or Better safe radios.

Edited January 22 by WRUU653
added info

WSAA635 · January 23

I do think it's odd they have frequency lists for everything from 150MHz to 700MHz but nothing for 108-135MHz AM.

I would figure you'd set that in the 150MHz area? There's nothing in Area A Setting for AM, just the sub-areas(150MHz, 200MHz, 300MHz, 450MHz and 700MHz) and all of those are technically too high.

WSAA635 · January 24

So another question while we're on the subject. Do I have to add the Airband channels from CHIRP or should I be able to add them from the front panel because when I try from the front panel they won't take but I do seem to be able to program them with CHIRP.

WRUU653 · January 24

33 minutes ago, WSAA635 said:

So another question while we're on the subject. Do I have to add the Airband channels from CHIRP or should I be able to add them from the front panel because when I try from the front panel they won't take but I do seem to be able to program them with CHIRP.

I have always used Chirp but I think you should be able to do it front panel but you will have to select AM-SW for each memory you want to see as AM. On my radio it’s menu 54.

WSAA635 · January 24

Thanks. I think I'm going to try to upload some Airband frequencies via CHIRP to see if I get anything. Thanks again.

WSAA635 · January 24

OK, even with all the freq. bands set to AM and AM Auto and everything else after I loaded some local Airbands into the radio I still can't get below 136.000MHz. I'm starting to think this radio is broken or something. Guess it's time to send it back to Amazon for a refund and go back to square 1.

WRUU653 · January 24

@WSAA635 Check your frequency limits

Sign In

Wouxun KG-UV9D Plus unlock?

Question

WSAA635

26 answers to this question

Recommended Posts

back4more70

WSAA635

WRWE456

WRUU653

WSAA635

WRWE456

WSAA635

WSAA635

WRUU653

WSAA635

WSAA635

WRUU653

back4more70

SteveShannon

WRUU653

WSAA635

WRUU653

WRUU653

WRUU653

WSAA635

WSAA635

WRUU653

WSAA635

WSAA635

WRUU653

Join the conversation

Browse

Activity

Classifieds

Important Information