WRZM243 Posted April 2 Report Share Posted April 2 I have a GMRS Repeater... How often does my id have to be transmitted over it via "morse" code or voice ID? Quote Link to comment Share on other sites More sharing options...
0 WRXP381 Posted April 2 Report Share Posted April 2 I have only 1 repeater near me that Id’s and it does it every 4min. It’s stupid and annoying and gets in the way of the channel use. Depends on how it’s used Normally just like a station every 15m and at the end of transmission, however ….. (c) Any GMRS repeater station is not required to transmit station identification if: (1) It retransmits only communications from GMRS stations operating under authority of the individual license under which it operates; and, (2) The GMRS stations whose communications are retransmitted are properly identified in accordance with this section. WRZM243 1 Quote Link to comment Share on other sites More sharing options...
0 BoxCar Posted April 2 Report Share Posted April 2 If the repeater is or has been active, it must be identified at least once every 15 minutes. If it is just listening and not transmitting, it does not have to be identified. Read through the rules for GMRS in Part 95 of the FCC regulations. WRZM243 and tcp2525 2 Quote Link to comment Share on other sites More sharing options...
0 gortex2 Posted April 4 Report Share Posted April 4 Who cares ? If you want it to ID let it ID. If not dont. Quote Link to comment Share on other sites More sharing options...
Question
WRZM243
I have a GMRS Repeater... How often does my id have to be transmitted over it via "morse" code or voice ID?
Link to comment
Share on other sites
3 answers to this question
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.