-
Posts
630 -
Joined
-
Last visited
-
Days Won
5
Content Type
Profiles
Forums
Events
Gallery
Classifieds
Posts posted by WRXB215
-
-
-
@Chessy68 Welcome to GMRS. As far as antennas go, Both Nagoya and Abbree make a 771G which is a very good antenna. Nagoya also makes a 701G which is shorter but still typically better than the stock antenna. Abbree doesn't offer the 701G yet, only the 701UV. Abbree does provide some good Tactical antennas. I haven't tried one yet but so far all the reviews I've seen have been good.
I live in Baytown. I'm not aware of any GMRS clubs in the area but there are a lot of good repeaters around here. Check this site, myGMRS.com and also texasGMRS.net to find lots of good repeaters.
-
14 hours ago, WSCH851 said:
I couldn't find anything on CHIRP to program my UV-5G so I used the GM-5RH tab and everything worked and uploaded the repeaters etc to the UV-5G if this is what you are asking.
As far as I know, there still isn't anything in chirp that matches up with the GM-15 Pro. As soon as something does, I'd sure like to know about it.
-
@WRVY822 A GMRS type certified radio is not supposed to allow you to transmit on both HAM and GMRS at the same time. Some radios appear to get around the separation of hardware issue by wiping out the programming every time you switch from one service to the other and only allow you to transmit on one service at a time.
There are HAM radios that can transmit on GMRS frequencies but you are not supposed to use them for that.
I do not have the radio in question so I can't tell you what it actually does, I can only tell you what it is supposed to do.
-
In theory, the GMRS version will only transmit on GMRS frequencies, and it will have repeater channels with the offset baked in.
-
-
-
I'm not sure what the policy is for this but if @rdunajewski is ok with it, I can upload my copy of the software here for others to download. I got it from Abbree. I too need a firmware update so I'm going to reach out to Abbree today to ask for that as well. Those frequency miss-matches are not a show stopper for me since I don't use that many repeaters on my HTs but still, it should be fixed.
-
6 minutes ago, 73blazer said:
And I can't say I've ever seen a fuse on the negative lead unless it was a positive ground old ford vehicle.
I'm fairly new to this so I can't say what's common. All I know is my AnyTone AT-778UV has one on each wire.
-
-
10 hours ago, OffRoaderX said:
if you buy from ebay, beware, its a den of thieves and liars.
There are some good sellers on eBay but yes you definitely have to beware. eBay tends to be a magnet for shady characters.
-
-
@WRKC935 Yep, Hollywood tends to only portray a small extreme example of group.
Examples of how they portray groups:
- All CB operators are good old boy truck drivers.
- All Texans wear cowboy hats and boots and say "yeeha."
And the list goes on.
PS
Yes, I know some people here are going to claim those two examples are accurate. -
Yes.
I just got the Baofeng GM-15 Pro software installed and started using it so I don't know a lot yet but so far, so good. I did notice that some of the TX frequencies on the DIY channels are not correct. I haven't tried to contact Baofeng about it yet.
Edit:
Just noticed the one I posted is wrong. -
22 minutes ago, nokones said:
If you want to keep your family and friends only repeater private, don't list it on mygmrs.com. Also, I would split the tones and use CTCSS on the downlink/repeater output side and an Inverted DPL/DCS code on the uplink/repeater input side.
And change the tones from time to time.
-
45 minutes ago, WRYS709 said:
Where did you find version 2.0 SIX of the CPS?
I like that typo.
-
@WSAF467 If you can give us a little more detail on where you are having trouble, we may be able to help you. Otherwise we can only take a shot in the dark as to what the problem it.
-
@WSCK857 Welcome to GMRS.
-
-
-
1 hour ago, edisondotme said:
Woah, is there a way I can verify my radio isn't doing this without a power meter/dummy load/special equipment?
On mine, I know that High power is actually High power because it is the only power setting that will hit the Channelview repeater from my house.
Now, whether or not Low and Medium are reversed, I haven't done anything to verify that yet.
-
1 hour ago, OffRoaderX said:
radiotards
-
4 hours ago, nokones said:
You might want to look into being a member of the Texas GMRS Club.
TexasGMRS.net
-
First "Mobile", stuck on what to get.
in General Discussion
Posted
While I'm jealous of all you guys that can afford to buy the nice radios, my AnyTone AT-778UV with Nagoya UT72 antenna is actually performing quite well.